ViewSonic ® N3250w LCD TV - User Guide - Guia do usuário - Guía del usuario ViewSonic ® Model No.
Important Safety Instructions .......................................................................... 1 Copyright Information ...................................................................................... 2 Product Registration ........................................................................................ 2 Antenna Installation Instructions ..................................................................... 3 Cleaning the LCD TV ........................................................
ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7.
Copyright Information Copyright © ViewSonic Corporation, 2006. All rights reserved. ® Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice.
ENGLISH Antenna Installation Instructions 1.
Getting Started Congratulations on your purchase of a ViewSonic® LCD TV. Important! Save the original box and all packing material for future shipping needs. Package Contents • LCD TV • Power Cord • VGA Cable • Quick Start Guide ENGLISH Your LCD TV package includes: • 41-Key Remote Control with batteries • RCA Cable • ViewSonic User Guide Fixing ViewSonic LCD TV to the Wall The LCD TV can be wall-mounted or freestanding.
ENGLISH Front View of the Product 1 2 3 4 7 5 6 8 1 Volume Down Decrease sound volume or adjust a highlighted control while in OSD menu. 2 Volume Up Increase sound volume or adjust a highlighted control while in OSD menu. 3 Menu Turn OSD menu ON/OFF. 4 CH Down Channel down when source is at TV or select a control while in OSD menu. 5 CH Up Channel up when source is at TV or select a control while in OSD menu. 6 ENTER To highlight a control in OSD menu.
Rear View of the Product B C D E F I H G A Analog TV input Connect to NTSC, PAL M/N TV source. B S-Video input Connect this port to the S-Video output of A/V device. C AV/ S-Video signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device. D YPbPr signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device. E YPbPr signal input Connect this port to the YPbPr output of A/V device.
ENGLISH Remote Control ViewSonic 7 N3250w
Remote control button function as follow 1 POWER Power ON/OFF 2 MTS 3 INFO Select Mono, Stereo or SAP in TV 4 SLEEP Set TV Sleep timer 5 SOUND Select sound modes 6 0~9, 100/- number button Directly channel select 7 VOL+ and VOL- Adjust volume UP/DOWN 8 FAV.
Installation ENGLISH 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION • Only use the specified AAA batteries. • Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. • Insert batteries according to (+) and (-) markings.
3. Connecting to DVD / Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV.
ENGLISH 4) With HDMI cable: HDMI Cable (not supplied) VCR or DVD Player (DVD Player should have the HDMI output terminal) 4. Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). Audio in Cable (not supplied) Stereo system 5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately).
6. Connecting to a Computer ENGLISH Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. PC VGA 15 Pin Cable 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. PC PC Audio Connection (not supplied) 8.
Basic Operation ENGLISH To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug, and the power LED indicator will light red. Power On/Off To turn the LCD TV on/off: Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV.
Sound Press the SOUND button on the remote control to switch between the Smart Sound modes of User, Rock, POP, Live, Dance, Techno, Classic, and Soft. Channel Select Press number key or CH ▲/▼ button to select your desired channel. In TV mode: The 100/- button functions as “100”. If your desired channel is below 100, directly press number buttons. If your desired channel is over 100, press 100/- button first, and then press the other two number buttons. Ex: Your desired number is 8.
OSD Functions ADVANCED OPERATION — OSD MENU Video Menu — Adjusting the picture quality ENGLISH Video Menu is active in all but the VGA input source. • Contrast: To adjust contrast of video. (right: Max, left: Min.) • Brightness: To adjust luminance of video. (right: Max, left: Min.) • Color: To adjust color. (right: brilliant color, left: pale color.) • Tint: To adjust tint level. (right: greenish tone, left: reddish tone.) • Sharpness: To adjust picture sharpness. (right: sharper, left: softer.
TV Menu — To set up for TV ENGLISH It is only active in TV source. • Tuner Mode: To select Cable or Air as the TV source. • Auto Scan: To auto scan the TV channels. Press ENTER to start auto scanning TV channels. Press ENTER again at any time to interrupt scanning. • TV: To select the TV channel to be skipped. Press ◄► to change channel. • Channel Add/Del.: Select Delete to skip the channel appointed, or select Add to restore the channel appointed.
ENGLISH When you enter this control, the screen below will be displayed. The factory default of the password is “0000”. To enable parental control, input the password, press ▼ button to focus on OK key, and press ENTER. (select Cancel if you want to exit) After entering, the following screen will be shown. Channel Lock: To lock channels. Use ◄► to select the channel you want to lock, and then press ENTER to lock or unlock it.
VGA Menu — To set up for computer ENGLISH It is only active in VGA sources. • Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. • Contrast: To adjust contrast of the video. • Brightness: To adjust luminance of the video. • Fine Tune: To adjust the delay time of data and clock to reduce noise in picture. • Manual Clock: To adjust the horizontal pixel clock of the video. • H Position: To adjust the horizontal position of the picture.
2. Use ◄► to select the sub-input source and press ENTER to confirm. Note: To select the input source for main screen, press INPUT button. • SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound. ENGLISH The function is available both in PIP and POP. • PIP Size Select: Press P.SIZE to select the size of sub-screen. The function only acts on PIP. • PIP Position Select: Press P.POS to select the position of sub-screen. The function only acts on PIP.
Other Information LCD Type Color Filter Glass surface Input signal RGB 31.51” TFT Active Matrix RGB 0.51075 (H) x 0.51075 (V) mm pixel RGB vertical stripe Anti-Glare Audio RGB analog (0.7/1.
ENGLISH Troubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected. • Make sure the AC power is ON, DC power button is ON (Green LED). • Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Poor or no picture • The TV station may be experiencing problems. Try another channel. • The Cable TV signal may be scrambled or encoded. Please contact your local cable operator.
Limited Warranty VIEWSONIC® LCD TV How long the warranty is effective: ViewSonic LCD TVs are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser. What the warranty does not cover: 1. Any product on which the serial number has been defaced, modified or removed. 2. Damage, deterioration or malfunction resulting from: a.
ViewSonic ®