ViewSonic ® N3250w LCD TV Display - User Guide - Guide de l’utilisateur - Guía del usuario ViewSonic ®
Contents Product Registration.................................................................2 For Your Records.....................................................................2 Important Product Safety Instructions......................................3 Antenna Installation Instructions...............................................4 Cleaning the LCD Display.................................................4 Getting Started Package Contents..............................................................
Copyright © ViewSonic Corporation, 2005. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
IMPORTANT PRODUCT SAFETY INSTRUCTIONS ATTENTION: Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product follow its operating and keep this user guide for future reference. INSTALLATION 1. Grounding or Polarization Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
ANTENNA INSTALLATION INSTRUCTIONS 1.
Getting Started Congratulations on your purchase of a ViewSonic® LCD TV display. Important! Save the original box and all packing material for future shipping needs.
Front View of the Product 1 E N G L I S H 2 3 4 7 5 6 8 1 Volume Down Decrease volume or adjust a highlighted control decreasingly while in OSD menu. 2 Volume Up Increase volume or adjust a highlighted increasingly control while in OSD menu. 3 MENU Turn OSD menu ON/OFF. 4 CH Down Channel down/ Scroll down. 5 CH Up Channel up/ Scroll up. 6 ENTER Confirm selection.
Rear View of the Product A B C D E F G H I J K L MN O A TV signal input Connect to the antenna or cable service. B AV Video input Connect the external video devices such as VCR, DVD and video game into this jack. C S-Video input Connect the external video device such as VCR, DVD and video game into this jack. D YCbCr signal input Connect the external video device with component output to these jacks. E AV/ S-Video signal Audio input (left/right) Connect the external audio into this jack.
Remote Control E N G L I S H ViewSonic N3250w 8
Remote control button function as follow A Source button Select Input Source B *PIP/POP button (Guide) Activate PIP or POP feature (Activate Guide-WMA only) C *SLEEP button Set timer to turn off TV D CC button ( Close Caption (Back button-WMA only) E Volume F Back) / Volume MUTE button Adjust Volume Mute On/Off G POWER button Power ON/OFF H Device buttons Select desire device I *PIP sub-buttons P.
Key ”Defaults” The ‘default’ out of box setting enables the Remote to control a predetermine TV, DVD, STB, VCR, VPB, WMA and AUD. Depending on Device desire the following model will be active. Device Default Setting TV ViewSonic DVD Samsung STB RCA VCR Sony VPB ViewSonic WMA ViewSonic WMA-100 AUD Sony Note: Multiple pre-programmed codes are available for some devices; if default setting does not function, see pre-programmed table for additional codes.
Basic Setup 1 Power on the A/V component you wish to setup, so that you can test codes by sending power off commands. 2 Refer to the Pre-programmed code tables on pages 2-3 and write down the code number listed. 3 Press and hold the button for the desire device for approximately six seconds. The top LED will turn on, enter pre-programmed code. LED will blink to indicate preprogrammed code was captured code was captured correctly.
AUX Key Setup The AUX key is used to operate a second TV, DVD, STB, VCR, VPB, WMA, and AUD. A fourth digit is necessary to identify the type of device the key will control. TV =1 VPB = 5 DVD = 2 WMA = 6 STB = 3 AUD = 7 VCR = 4 AUX Buttons For example, to control a Sony DVD player with a code of 027 under the AUX key a 2 must be added in the beginning of the pre-programmed code making it 2027.
Pre-Programmed Code Tables DVD Players-2 ViewSonic LCD TV’s and Plasmas BRAND N1700W N1300 N1500 N1750W N2010 N2010-E N2700W N2750W N3020W N3200W N3200W-E VPW4255 VPW5500 N2000 N3000W CODE 001 002 003 004 005 006 007 008 009 010 011 012 012 014 015 DVD Players-1 Grundig Harman Kardon Hitachi Irradio JVC Kenwood Koss LG Magnavox Marantz Memorex Mintek Mitsubishi Mustek NAD Nakamichi Norcet Onkyo Oritron Panasonic Phillips BRAND Aiwa Aiba Apex Audiovox Blaupunkt Bose Broksonic Bush Clarion Classic CyberH
STB - Set Top Box E N G L I S H BRAND Akai Alba Allsat Alphastar Amstrad Ankaro Anttron Apollo Armastrong Asat Astra Astro AudioTon Best Blaupunkt Brain Wave BSkyB Bush Chaparral CityCom Clatronic Condor Crown Daeryung Dish Network DNT Drake Echostar Einhell Elta Emme Esse Ep Sat Eurosat Eurosky Eurostar Express Vu Ferguson Finlandia Finlux Fuba Fujitsu Galaxis GE General Instruments GMI Goodmans Granada ViewSonic CODE 019 005, 006, 007 019 057 001 012 005 005 010 019 010, 013 007, 008, 012, 015 007 012
Quelle Radio Shack Radiola Radix RCA Realisitic RFT Saba Sabre Sagem Salora Samsung Satcom SatPartner Schneider Seemann SEG Siemens Skymaster Sony Star Trak Strong STS Sunstar Tandberg Tandy Tantec TechniSat Teco Telasat Telefunken Teleka Telemaster Telesat Televes Thomson Thorn Tonna Toshiba Triax Uniden Unisat Unitor Universum Visiosat Vortec Wewa Womersat Wisi Zehnder Zenith 015 048, 049 019 014 000, 040, 041 044 019 008, 017 006 025 013 005, 035, 057 016, 018 005, 007, 008, 016 012, 021, 022 010, 014 0
JC Penney VCR BRAND Action Admiral Aiko Aiwa Audiovox Bell & Howell Broksonic Calix Canon Capehart Carver CCE Citizen Colortyme Craig Curtis Mathes Daewoo E N G L I S H Daytron Denon Dimensia Electrohome Emerson Fisher Fuji Funai Gerrard GE Go Video Goldstar Gradiente Harman Kardon Harwood Hitachi JBL ViewSonic CODE 102 101, 144, 145 127 005, 126 122 119 059, 105, 120 122 124, 125 083, 138 131, 151 127, 130 095, 121, 122, 123, 127 096, 117 085, 090, 104,121, 122, 130 077, 079, 114, 117 121, 124, 125, 15
Pentax 077, 088, 128, 129, 136, 141 Philips 022, 023, 024, 025, 026, 027, 076, 110, 111, 124, 131, 133, 151 Pioneer 078, 103, 118, 128, 142, 146 Portland 083, 138 Precision 102 Proscan 114, 150 Proton 085 Quasar 090, 124, 125 Radio Shack 090, 122, 133, 145 Radio Shack/Realistic 119, 121, 122, 124, 125, 126, 133, 144 Radix 122 RCA 048, 051, 078, 079, 088, 114,115, 121, 124, 128, 129, 136, 141, 148, 149, 150 Realistic 079, 090, 094, 097, 104, 119, 121, 122, 123, 124, 125, 126, 133, 144, 145 Ricoh 143, 147 Ru
AUD E N G L I S H BRAND Aiwa Akai Bose Carver Curtis Mathes Denon Fisher GE Goodmans Gradiente Harman Kardon Hitachi JBL Jensen Jerrold JVC Kenwood Luxman Marantz Mclntosh NAD Nakamichi NEC Nikko Onkyo Optimus Panasonic CODE 024, 041, 063 013 039 075 065 001, 053, 054, 059, 076 005, 066, 068, 073 030 013 086 002, 025, 052, 070 003, 083 025 085 026, 028 004, 050, 057 005, 055, 058, 072, 080 088 042 082 064 078 064 087 006, 044, 048, 079 065, 071 032, 033, 051, 056, 062, 074, 091 Philips 007, 037, 038, 040
Installation 1. Insert Remote Control Batteries 1 Remove the battery cover by pulling then lifting the knob on the cover. 2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment. 3 Reattach the battery cover. CAUTION Only use the specified AA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a risk of fire or lead to personal injury. Insert batteries according to (+) and (-) markings.
3. Connect Audio Cable Connect Video/Audio cables from compatible devices into the back panel of N3250w. Audio in Cable (Cable not supplied) Stereo system E N G L I S H OPTIONAL: To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port to the appropriate AUDIO IN port on a compatible amplifier as shown on the right. 4. Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices Connect Video/Audio cables from compatible devices into the back panel of N3250w.
S-Video model: S-Video Cable (Cable not supplied) Audio in Cable (Cable not supplied) VCR YCbCr model: E N G L I S H YCbCr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Palyer or VCR ViewSonic N3250w 21
YPbPr model: YPbPr Cable (Cable not supplied) Audio in Cable (Cable not supplied) DVD Palyer or VCR HDMI model: E N G L I S H There are two possible HDMI cable terminals of your DVD player. Please refer to one of the connection that fits for your requirement.
(2) HDMI cable DVD Palyer (DVD Palyer should have the HDMI output terminal) HDMI Cable (Cable not supplied) Note: To receive the sound from DVD, please turn on Sound Menu of OSD for selecting HDMI audio to HDMI. However, the input source should be in in HDMI (see Page 44). 5. Connect to the PC E N G L I S H VGA (15pin D-Sub): Connect the VGA cable from VGA output of PC to the VGA terminal input of N3250w. PC up to 1280 x 1024, or 1360 x 768 is the preferred resolution.
PC Audio in: Connect the Audio In cable (green) from audio output of your PC to the audio input terminal (green) of N3250w. PC PC Audio in Cable (Cable not supplied) E N G L I S H HDMI: Connect the HDMI cable from HDMI output of PC to the DVI terminal input of N3250w.
Earphone: Connect Earphone from compatible devices into the back panel of N3250w. Earphone (Earphone not supplied) 6. Connect power cable Connect the power cord to the N3250w then to a properly grounded AC outlet.
7. Turn Power ON Press the Power button under the LCD TV, or press the Power On (red) button on the Remote Control. Turn Video source power ON. 8. Select input source for your LCDTV display, via either OSD menu or Remote control The Source key of N3250w is the shortcut key for input selection. TV key of remote control is a shortcut for TV selection.
Basic Operation To operate the function of your LCD TV, you can use your remote control or those buttons above your LCD TV to set input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Insert the power plug. 2. Connect external equipment properly. 3. Turn on the Main AC Power Switch, located on the rear of the cabinet.
OSD Functions Press MENU to turn on OSD menu. To move the cursor bar, please use CH to select your desired item, and then press ENTER. In addittion, you can adjust the volume by using VOL”+” or “-”. Press to adjust the condition. Press MENU again to get into next page of OSD menu. Ex: When in page 1, press MENU for one time to get into page 2; two times to get into page 3.
BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low) CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left: low contrast) SHARPNESS: To adjust the sharpness of image. (right: sharpen, left: soften) COLOR: To adjust color saturation. (right: brilliant color, left: pale color) TINT: To adjust the video hue level.
This page is to select your input sources, such as TV, AV,S-VIDEO, YCbCr, YPbPr, HDMI, and VGA. How to select the input sources: Use to move cursor bar up and down ENTER to input the desired item. Press MENU again to get into next Menu (PIP/POP MENU).
PIP Screen POP Screen When selecting PIP , it will show the other items to offer the adjusting function— SUB INPUT, MODE, AUDIO, SWAP, PIP SIZE, and PIP POSITION as following: PIP/POP MENU SUB INPUT MODE AU D I O S WA P PIP SIZE PIP POSITION VG A PIP MAIN 100 1 E N G L I S H : SELECT : ADJUST M E N U : N E X T PAG E AUDIO: To select the source of sound: from main screen or sub-screen. SWAP: To exchange main screen to sub-screen, including video and sound. Press to swap them.
PIP/POP MENU E N G L I S H SUB INPUT MODE AU D I O S WA P VG A POP MAIN : SELECT : ADJUST M E N U : N E X T PAG E When selecting POP, it will show the other items to offer the adjusting function— SUB INPUT, MODE, AUDIO, and SWAP. Press MENU again to get into next Menu (SETUP MENU).
Source Input: TV Source Input: AV, S-Video, YCbCr Page 1 PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 3 PIP/POP MENU Page 4 SETUP MENU Page 4 SETUP MENU Page 5 TV MENU Page 5 SOUND MENU Page 6 SOUND MENU Page 6 PARENTAL CONTROL Page 7 PARENTAL CONTROL SETUP MENU OSD POSITION-H OSD POSITION-V OSD TIME OUT T R A N S PA R E N C Y OSD COLOR L A N G UAG E M E M O RY R E C A L L : SELECT : ADJUST 50 50 25 13 COLOR 1 ENGLISH E N G L I S H M E N
(It does not function in any other mode except in TV mode) Source Input: TV TV MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 TV MENU Page 6 SOUND MENU Page 7 PARENTAL CONTROL MTS T V / C AT V S E L E C T AU TO S C A N SET CHANNEL CHANNEL LABEL FINE TUNE SLEEP : SELECT : ADJUST E N G L I S H STEREO CABLE 00 ADD 132 OFF M E N U : N E X T PAG E MTS: The function is to provide the multi-channel TV sound.
How to set a name for the channel? 1. Move your cursor bar to LABEL by using . 2. Press to get into the CHANNEL LABEL page. 3. Use or to pick up the numbers or letters, and then press ENTER to input the words. 4. After setting a name, move your cursor to SAVE then press ENTER for saving the input. How do I cancel the name? 1. Get into the CHANNEL LABEL page (see above instruction). 2. Move your cursor by using to select the “blank,” which is the last in the line of numbers, exactly beside “ --.“ 3.
Source Input: TV Source Input: AV, S-Video, YCbCr Page 1 PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 3 PIP/POP MENU Page 4 SETUP MENU Page 4 SETUP MENU Page 5 TV MENU Page 5 SOUND MENU Page 6 SOUND MENU Page 6 PARENTAL CONTROL Page 7 PARENTAL CONTROL SOUND MENU VO L U M E BASS TREBLE BALANCE S R S WOW Tr u B a s s E N G L I S H 20 50 50 50 ON 50 : SELECT : ADJUST M E N U : N E X T PAG E VOLUME: To adjust the volume.
Source Input: TV Source Input: AV, S-Video, YCbCr Page 1 PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 3 PIP/POP MENU Page 4 SETUP MENU Page 4 SETUP MENU Page 5 TV MENU Page 5 SOUND MENU Page 6 SOUND MENU Page 6 PARENTAL CONTROL Page 7 PARENTAL CONTROL PA R E N TA L C O N T RO L CAPTION C H A N G E PA S S WO R D T V R AT I N G G U I D E M PA A R AT I N G G U I D E : SELECT : ADJUST OFF E N G L I S H M E N U : N E X T PAG E Parental contr
PA R E N TA L C O N T RO L CAPTION C H A N G E PA S S WO R D T V R AT I N G G U I D E M PA A R AT I N G G U I D E OFF E N T E R PA S S WO R D ---- : SELECT : ADJUST M E N U : N E X T PAG E 4. Enter 0000 if you have not assigned the special password. PA R E N TA L C O N T RO L E N G L I S H NEW ---- : SELECT : ADJUST M E N U : N E X T PAG E 5. Use remote control to enter four digit numbers to set the new password.
PA R E N TA L C O N T RO L NEW VERIFY XXXX ---- : SELECT : ADJUST M E N U : N E X T PAG E 6. Enter the 4 digit numbers again to verify your new password, and then it will show OK on the screen, and then turn back to the Parental Control page. TV RATING GUIDE: To setup TV Rating. How to set up TV Rating? 1. Move the cursor to the item of TV RATING GUIDE. 2. Press . 3. There will appear captions “ENTER PASSWORD.” Input your password with your remote control.
PA R E N TA L C O N T RO L TV TV TV TV TV TV TV R AT I N G Y: U Y7: U FV U G: U PG: U D U L U 14: U D U L U MA: U LU SU SU SU : SELECT : ADJUST VU VU VU ENTER : ENTER M E N U : N E X T PAG E 5. Move the cursor by using to select the rating grade you expect to block. 6. Press ENTER to set block or unblock condition. ("B" means block; "U" means unblock.
MPAA RATING GUIDE: To setup the movie ratings. Enter your password with your remote control. PA R E N TA L C O N T RO L CAPTION C H A N G E PA S S WO R D T V R AT I N G G U I D E M PA A R AT I N G G U I D E OFF E N T E R PA S S WO R D ---- : SELECT : ADJUST M E N U : N E X T PAG E You can reference the operating steps of TV RATING GUIDE, for they are the same way as MPAA RATING GUIDE.
The Movie Ratings are defined as following G General audience R PG Parental guidance suggested NC-17 No one 17 and under limited PG-13 Parents strongly cautioned.
Source Input: VGA, HDMI, YPbPr The menus in VGA, HDMI, and YPbPr mode are as following: In VGA Mode: PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU AU TO A D J U S T BRIGHTNESS CONTRAST I M AG E H . P O S I T I O N I M AG E V. P O S I T I O N FINE TUNE H.
In HDMI Mode: PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU BRIGHTNESS CONTRAST I M AG E H . P O S I T I O N A S P E C T R AT I O I N F O R M AT I O N C O L O R T E M P E R AT U R E C O L O R F O R M AT : SELECT : ADJUST How to adjust the desired items: Use to move cursor bar up and down E N G L I S H Use 50 50 50 16:9 MEDIUM AU TO M E N U : N E X T PAG E to adjust the item. BRIGHTNESS: To adjust the luminance of the image.
In YPbPr Mode: PICTURE MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU AU TO A D J U S T BRIGHTNESS CONTRAST I M AG E H . P O S I T I O N I M AG E V. P O S I T I O N SHARPNESS COLOR TINT FINE TUNE A S P E C T R AT I O C O L O R T E M P E R AT U R E : SELECT : ADJUST How to adjust the desired items: Use to move cursor bar up and down Use 50 50 50 50 46 50 50 25 16:9 MEDIUM M E N U : N E X T PAG E to adjust the item.
Source Input: VGA, HDMI, YPbPr Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU MAIN: TV AV S_VIDEO YCBCR YPBPR HDMI VG A INPUT SELECT VG A SUB: : SELECT E N G L I S H TV ENTER : ENTER M E N U : N E X T PAG E This page is to select your input sources, such as TV, AV,S-VIDEO, YCbCr, YPbPr, HDMI, and VGA. How to select the input sources: Use to move cursor bar up and down ENTER to input the desired item.
Source Input: VGA, HDMI, YPbPr SETUP MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU OSD POSITION-H OSD POSITION-V OSD TIME OUT T R A N S PA R E N C Y OSD COLOR L A N G UAG E M E M O RY R E C A L L 50 50 25 13 COLOR 1 ENGLISH : SELECT : ADJUST M E N U : N E X T PAG E OSD POSITION-H: To adjust the horizontal position of OSD. OSD POSITION-V: To adjust the vertical position of OSD. OSD TIME OUT: To setup the displaying time of OSD.
Source Input: VGA, HDMI, YPbPr SOUND MENU Page 1 PICTURE MENU Page 2 INPUT SELECT Page 3 PIP/POP MENU Page 4 SETUP MENU Page 5 SOUND MENU VO L U M E BASS TREBLE BALANCE S R S WOW Tr u B a s s : SELECT : ADJUST E N G L I S H 20 50 50 50 ON 50 M E N U : N E X T PAG E VOLUME: To adjust the volume. BASS: To adjust the bass. TREBLE: To adjust the treble. BALANCE: To adjust the left and right audio balance. SRS WOW: To turn SRS(WOW) on/off. Tru Bass: To adjust the tru bass.
Other Information Specifications LCD Type Color Filter Glass surface RGB 31.5” view able 0.57075(H) x 0.57075(V) mm pixel pitch RGB vertical stripe Anti-Glare Audio RGB analog (0.7/1.
Troubleshooting No power Make sure power button (and rear power switch) is ON. Make sure A/C power cord is securely connected to the LCD TV. Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image Make sure the video cable supplied with the LCD TV is tightly secured to the video output port on the back of the Video source.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Contry/ Region Web site T = Telephone F = FAX Email United States viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 service.us@ viewsonic.com Canada viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 service.ca@ viewsonic.
Limited Warranty VIEWSONIC LCD DISPLAY E N G L I S H What the warranty covers: ViewSonic® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Appendix Safety Guidelines Warming: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA.................UL Canada.............CSA Germany..........VDE Switzerland .....
Compliance Information for U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ViewSonic ®
