NMP530 Quick Start Guide

ManualsBrandsViewSonic ManualsNetwork CardNMP-530

Packaged Contents

Check that you have all the following items in the package.

Network Media Player NMP-530

uick Start Guide

NMP-530

AC Power Adapter

S-Video/YPbPr Adapter

Quick Start Guide

Remote Control and Two

Batteries

RJ-45

Ethernet Cable

RS-232 Cable

ViewSonic CD

System Requirements

System requirements include a display, a network

environment, and a PC with network capability

Software Requirements

Software applications need to be purchased

separately in order to create material for playback,

such as graphics, video, and Flash files, etc.

PC Requirements (for basic server)

• Operating System: Any Windows

or Linux OS

capable of running a web server

• Processor: Intel

Pentium

4, 1 GHz or higher (or

compatible microprocessor)

• Memory: 512 MB RAM or more

• Network Interface: 100Base-T

Green LED: Activity

Blue LED: Power

Front view

Back view

Ethernet 10/100

POWER-5V DC

RS232

AUDIO LEFT

AUDIO RIGHT

CVBS

S-VIDEO/YPbPr

USB

VIDEO

HDMI*

Reset

AUDIO

*If your monitor has a DVI input, use an HDMI-to-DVI cable.

Summary of content (7 pages)

PAGE 1
Quick Start Guide Network Media Player NMP-530 Packaged Contents Check that you have all the following items in the package.
PAGE 2
Setup For the initial setup, you need the following: • A Router with DHCP services • A TV or Display with Composite or S-Video input for initial setup. During the setup, you can change the NMP-530 output to the final display being used. • A PC with Internet Browser 1 CONNECT TO A DISPLAY Connect the S-Video or Composite output of the NMP-530 to the corresponding input on your TV or other display.
PAGE 3
2 CONNECT TO A ROUTER Connect the supplied RJ-45 ethernet cable from the NMP-530 to a router with DHCP services. Refer to your router’s user guide or contact your network administrator for assistance.
PAGE 4
3 TURN POWER ON Connect the supplied AC Adapter DC Plug into the NMP-530. Turn the TV or the Display power on making sure that the Input is on the proper setting. Plug the AC Adapter to a wall outlet.
PAGE 5
4 IP ADDRESS Wait a few seconds and the IP Address of the NMP-530 appears on the screen. Make a note of the IP information as this will be used to login to the NMP-530. 5 LOGIN Open an Internet Browser, i.e., Internet Explorer on a PC in the same network. In the URL address field, type the IP address of the NMP-530 noted in the previous step > press Enter. The Login screen appears. Type the defaults Login: admin and Password: admin.
PAGE 6
7 SET VIDEO OUTPUT OF NMP-530 By default, the video output is set to S-Video. But, you can choose any one of the following connections if you prefer, depending on the type of display input you want to use. HDMI Connect an HDMI cable from the back of the NMP-530 to the HDMI interface on the back of the display. S-Video: Default. Connect an S-Video cable from the S-Video interface on the back of the NMP-530 to the S-Video interface on the back of the display. Component: Using the S-Video/YPbPr adapter.
PAGE 7
8 PUT BATTERIES IN REMOTE CONTROL Remove the back cover from the remote control as shown below. Put two AA batteries in the battery compartment. Be sure to match the positive end of the battery with the positive end in the compartment. Put the cover back on the remote control. For more information, see the NMP-530 User Guide. If you still need help, contact ViewSonic Customer Support as listed in the user guide or on our website. Website: Model Name: Model Number: Serial Number: Document Number: www.