User Guide

12
3.4 Unregister Device
When the device in the video wall is unregistered, any active playback on the device
will be stopped. When a device that’s managed by the Cloud is unregistered, any
active playback on the device will be stopped and the device’s cloud-enable property
becomes false.
There are two ways to unregister a device from the application.
Method 1:
1. Select the device from the Walls and Devices pane.
2. Click Unregister button in the General tab. A confirmation dialog appears.
3. Click Unregister.
Method 2:
1. 1. Right click on the device in Walls and Devices pane.
2. 2. Click Unregister. A confirmation dialog appears.
3. 3. Click Unregister.
3.5 Reset to Defaults
The device properties can be reset to defaults at any time. All device properties will
be reset to defaults. Only the device properties get reset.
1. Select the device from the Walls and Devices pane.
2. Click the General tab.
3. Click Reset to Defaults. A confirmation dialog appears.
4. Click OK.
3.6 Reboot Device
To reboot a device, follow these steps.
1. Select the device from the Walls and Devices pane.
2. Click Reboot from the Device Control pane. A confirmation dialog appears.
3. Click Reboot.
4. Click OK to close the information dialog that states The device will now reboot.