User Guide

14
3.7.1 NTP (Network Time Protocol)
Enable NTP:
When NTP is enabled, the device will get time from the NTP server. Every 5 minutes,
the device synchronizes with the server. When a change in the configuration is
made, it requires a reboot to take effect.
1. Select the device from the Walls and Devices pane.
2. Click the Network tab.
3. Check NTP Enabled to enable NTP.
Configure NTP Server:
1. Select the device from the Walls and Devices pane.
2. Click the Network tab.
3. Click Edit. Edit window appears.
4. Enter NTP server per line and click OK.
Disable NTP:
By default, NTP is disabled.
1. Select the device from the Walls and Devices pane.
2. Click the Network tab.
3. Uncheck NTP Enabled to disable NTP.