User Guide

16
3.8 AV Output
3.8.1 Brightness, Contrast, Saturation
The brightness, contrast, and saturation of the video output are configurable. By
default, brightness is 0%, contrast and saturation is 100%.
1. Select the device from the Walls and Devices pane.
2. Click the Output tab.
3. In the Video section, change the values as desired. The changes will take effect
immediately.
3.8.2 Volume
By default, the value of audio is 0% so you can’t hear audio. The volume of device
audio can be adjusted by:
1. Select the device from the Walls and Devices pane.
2. Click the Output tab.
3. Change the Audio volume value. The change will take effect immediately.
3.8.3 Audio Output
User can select either HDMI or Analog as audio output. By default, it uses HDMI. To
use analog audio output, connect a 3.5 mm mini-jack audio cable to the AV interface
of the device.
1. Select the device from the Walls and Devices pane.
2. Click the Output tab.
3. In the Configuration section, click Audio Output drop down list and select the
audio output mode. The change will take effect when playback is restarted.