User Guide

23
5.3 Grid Layout Mode
The grid Layout Mode allows users to configure the video wall in a traditional grid
or matrix pattern using identical displays with uniform spacing. This mode allows
users to adjust the video wall size (number and size of displays), device assignment,
bezels of display, spacing between displays and video wall rotation.
Follow the procedures below to configure a video wall composition in Grid mode.
1. Select the wall from the Walls and Devices pane.
2. Click the Composition tab under the Devices tab.
3. Click the drop-down list of Mode options and then select Grid.
By default, the video wall has a composition of 2x2 (2 displays wide by 2 displays
high). Use Add/Remove Column/Row buttons to adjust the size of the video wall.
To assign devices on displays, click the drop-down list in the display position box
and then select the name of the device that will be assigned to that position of the
video wall. To remove the device from the display, select the blank entry at the top of
the selection list. The device name in the drop-down list is grayed out if it’s already
assigned to another display.