Lamp Swapping Instruction

7. Usethehandletoslowlypullthelamp out of the projector.

CAUTION

y Pulling it too quickly may cause the lamp to break and scat-

ter broken glass in the projector.

y Do not place the lamp in locations where water might splash

on it, children can reach it, or near ammable materials.

y Do not insert your hands into the projector after the lamp

is removed. If you touch the optical components inside, it

could cause color unevenness and distortion of the pro-

jected images.

8. Asshowinthegure,insertthenewlamp.Alignthelamp

using the alignment holes and gently push the lamp into

the locked position

CAUTION

y Do not touch glass of lamp with bare hands. Oils from the

skin can create a hot spot on the lamp and may result with

damage to the lamp.

9. Insert the lamp connector and tighten the screw that se-

cures the lamp.

CAUTION

y Loosen screw may cause a bad connection, which could

result in malfunction.

y Do not over tighten the screw.

10.Replace the projector’s mylar and lamp cover.

9-1

9-2

9-3