User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Using the CEC function
- Using the 3D functions
- Using the projector in standby mode
- Adjusting the sound
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
- Copyright information
34
Menu operation
Menu system
Please note that the on-screen display (OSD) menus vary according to the signal type
selected.
The menu items are available when the projector detects at least one valid signal. If there is
no equipment connected to the projector or no signal detected, limited menu items are
accessible.
*The OSD settings vary according to the projector model you are using.
Main menu Sub-menu Options
1.
DISPLAY
Screen Color Off/Blackboard/Greenboard/Whiteboard
Aspect Ratio*
Auto/4:3/16:9/16:10/Panorama/2.35:1/
Anamorphic
Keystone Vertical
Position
Phase
H. Size
Zo
om
OverScan Off/1/2/3/4/5
3X Fast Input Inactive/Active
2.
IMAGE
Color Mode
Brightest/Presentation/Standard/Photo/
Movie
Brightness
Contrast
Color Temp.
Warm
Red Gain/Green Gain/
Blue Gain/Red Offset/
Green Offset/Blue Offset
Normal
Cool
Advanced
Color
Tint
Sharpness
Gamma
C1/C2/C3/C4/C5/C6/C7/C8/G1/G2/G3/G4/
G5/sRGB/DICOM SIM
Brilliant Color Off/1/2/3/4/5/6/7/8/9/10
Noise Reduction
Color
Management
Primary Color
Hue
Saturation
Gain
Reset Color Settings Reset/Cancel