PF775 Color Monitor User’s Guide Guide de l’utilisateur Bedienungsanleitung (Latin American Spanish) (Italian) (Brazilian Portuguese) (Swedish) PerfectFlat® (Russian) 17" (16.
Copyright © ViewSonic Corporation, 1999. All right reserved. Power Macintosh is a registered trademark of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, PerfectFlat, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).
Power Cord Safety Guidelines (continued) AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE CUT OFF AND DISPOSED OF SAFELY. THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE SOCKET. If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CONTENTS Getting Started Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 E N G L I S H Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Quick Installation* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operation Front Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started Getting Started Congratulations on your purchase of a ViewSonic PF775 color monitor. Important! Save the original box and all packing material for future shipping needs. NOTE: This product was designed for operation in the magnetic fields of the hemisphere where it was purchased. Also, the word "Windows®" in this user guide refers to the following Microsoft® operating systems: Windows '95, Windows '98, Windows NT® (4.0).
Quick Installation 1 Connect video cable Make sure both the monitor and the computer are powered OFF. Connect the video cable to the computer. Macintosh® users: Connect a Macintosh adapter to the video cable, then to the computer. To order a Macintosh adapter, send an email to vsparts@viewsonic.com or call ViewSonic® Customer Service (see the back cover of this guide). You will need to provide your monitor's serial number.
Operation Adjust your ViewSonic PF775 monitor using the buttons on the Front Control Panel to access the Main Menu and the Control Screens (see the next few pages). Front Control Panel E N G L I S H To adjust the monitor, follow the numbered steps in sequence as shown below. Press [▼] to scroll down, [▲] to scroll up Main Menu to highlight name of Control Screen to be displayed. 1 Press Button [1] to exit Control Screen or Main Menu and save adjustments.
To exit the OnView® menu or screen & save changes, press button [1]. OnView Main Menu, part 1, continued CONTRAST adjusts foreground white level of the screen image. [▼] to decrease contrast or [▲] to increase contrast. BRIGHTNESS adjusts background black level of the screen image. [▼] to decrease brightness or [▲] to increase brightness. H. SIZE (Horizontal Size) adjusts the width of the screen image. E N G L I S H [▼] decreases width, [▲] increases width. H.
To exit the OnView® menu or screen & save changes, press button [1]. OnView Main Menu, part 2 E N G L I S H VIEWMETER® displays the frequency signal input (horizontal scan and refresh rate) coming from the graphics card in your computer. H. CONVERGENCE (Horizontal Convergence) adjusts horizontal color alignment. Use only if you see red or blue around the horizontal segments of black letters on a white background. Press [▼] or [▲] to adjust. V.
To exit the OnView® menu or screen & save changes, press button [1]. OnView Main Menu, part 2, continued VIEWMATCH® COLOR provides four color adjustment options: three preset color temperatures and User Color, which allows you to individually adjust red, green, and blue (RGB). To activate one of the three preset color temperatures, highlight your selection by pressing [▼] or [▲] and then press button [2].
To exit the OnView® menu or screen & save changes, press button [1]. OnView Main Menu, part 3 E N G L I S H OSD POSITION allows you to reposition the OnView display (including all menus and control screens). Press [▼] or [▲] to move the OSD. To exit this screen, press button [1]. MOIRE reduces interference that causes unwanted color textures or patterns. Press [▼] or [▲] until interference patterns disappear.
Other Information Specifications CRT Type Phosphor Glass surface E N G L I S H 17" (16.0" viewable diagonal area), 0.25mm aperture grille pitch, 90° deflection, PerfectFlat® RGB, medium short persistence ARAG®, (Anti-reflective and anti-glare) coating Standard light transmission rate = 41.5% Input Signal Video Sync RGB analog (0.7/1.
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the back of the monitor and to a power outlet. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power on but no screen image • Make sure the video cable supplied with the monitor is tightly secured to the video output port on the back of the computer.
Cleaning the Monitor • MAKE SURE THE MONITOR IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. E N G L I S H To clean the case 1 Use a soft, dry cloth.
LIMITED WARRANTY VIEWSONIC PF775 MONITORS What the warranty covers: ViewSonic ® warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will at its sole option repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
NOTES E N G L I S H 16 Other Information ViewSonic PF775
Customer Service To receive the most prompt assistance, dial the appropriate number below and listen to all menu options before making your selection: Customer Support, Technical Support, Parts, etc. U.S. and Canada only 1-800-688-6688 From outside U.S. and Canada 909-869-7976 From Europe 44 (1293) 643-900 From Asian/Pacific Rim countries 886 (22) 248-4072 Other Options Technical Support Questions vstech@viewsonic.com Product or Dealer Questions prodinfo@viewsonic.com World Wide Web: http://www.viewsonic.
