User Guide

54
Function Description
3D Settings See "Using the 3D functions" on page 37 for details.
HDMI Settings See "Changing HDMI input settings" on page 27 for details.
LAN Control
Settings
See "Controlling the projector through a LAN environment"
on page 38 for details.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode" on page 59 for details.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For
changing the lamp, please contact qualified service personnel.
Lamp Hours
See "Getting to know the lamp hour" on page 59 for details on
how the total lamp hour is calculated.
Filter Settings
See "Using the dust filter (optional accessory)" on page 57 for
details.
DCR
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the projector
will automatically switch the lamp mode between normal and
economic modes according to the input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent lamp mode switching may
shorten lamp life and noise level will vary during
operation.
Closed Caption
Selects a preferred closed captioning mode when the selected
input signal carries closed captions.
• Captions: An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are
closed captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video
or S-Video input signal is selected and its system format
is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1
displays captions in the primary language in your area).
Reset Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Phase,
H. Size, OverScan, Language, Projector Position, High
Altitude Mode, Security Settings, Remote Control Code,
3D Sync, Filter Mode, LAN Control Settings, HDMI
Settings.
5. ADVANCED menu