User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Using the CEC function
- Using the 3D functions
- Controlling the projector through a LAN environment
- Using the projector in standby mode
- Adjusting the sound
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
55
Function Description
Language
Sets the language for the On-Screen Display (OSD) menus.
See "Using the menus" on page 24 for details.
Projector
Position
See "Choosing a location" on page 10 for details.
Menu Settings
Menu Display Time
Sets the length of time the OSD will remain active after your
last key press. The range is from 5 to 30 seconds in 5-second
increments.
Menu Position
Sets the On-Screen Display (OSD) menu position.
High Altitude
Mode
A mode for operation in high altitude areas. See "Operating
in a high altitude environment" on page 36 for details.
Quick Auto
Search
See "Switching input signal" on page 27 for details.
Security
Settings
See "Utilizing the password function" on page 25 for details.
Panel Key Lock See "Locking control keys" on page 36 for details.
Remote Control
Code
See "Remote control code" on page 8 for details.
Baud Rate
Selects a baud rate that is identical with your computer’s so
that you can connect the projector using a suitable RS232
cable and control the projector with RS232 commands.
6. SYSTEM menu