User Guide
Table Of Contents
- Table of contents
- Important safety instructions
- Introduction
- Positioning your projector
- Connection
- Operation
- Starting up the projector
- Using the menus
- Utilizing the password function
- Switching input signal
- Adjusting the projected image
- Magnifying and searching for details
- Selecting the aspect ratio
- Optimizing the image
- Setting the presentation timer
- Hiding the image
- Locking control keys
- Operating in a high altitude environment
- Using the CEC function
- Using the 3D functions
- Controlling the projector through a LAN environment
- Using the projector in standby mode
- Adjusting the sound
- Shutting down the projector
- Menu operation
- Maintenance
- Troubleshooting
- Specifications
81
Projector specifications
All specifications are subject to change without notice.
Not all models can be purchased in your region.
Model name PG800X PG800W PG800HD
Product Specification
Resolution 0.55” XGA (1024
x 768)
0.65” WXGA (1280
x 800)
0.65” 1080p (1920 x
1080)
Throw ratio 1.51~1.97 1.21~1.57 1.15~1.5
Display system 1-CHIP DMD
Lamp Type 370 W (RCL-103)
Input connector
RGB-in 2
Component input shared with RGB-in
S-Video 1
Composite input 1
Audio-in 2
RCA R&L 1
Microphone 1 (share with audio in 2)
Mini USB 1
HDMI (1.4a) 1
HDMI
1 (dongle)
3D VESA 1
Output connector
RGB-out 1
Audio-out 1
Speaker 10 watt x 2
USB type A (5V/
2A)
1
USB microUSB
Wire (5V/2A)
1
Control terminal
RS-232 serial
control
9 pin x 1
LAN RJ45 x 1
12V Trigger 1
IR receiver 2 (Font x1/Top x1)
IR connector 1
Mechanical
Net Weight 6.2 Kg (13.7 lbs)
Electircal
Power Source AC100–240V, 50–60 Hz
Power
Consumption
STD: 573.8 W (Max); ECO: 468.85W (Typical);
< 0.5 W (Standby)