User Guide

6. The laser module must be installed for the finger touch control function,

and the laser light must be adjusted parallel to the surface of the screen.

Please perform adjustments according to the steps below:

6.1 Open the top cover of the Laser Module and press the Red Laser switch;

a levelled laser beam will appear used to calibrate the flatness of the Laser

Module and whiteboard.

vTouch

PJ-vTouch-10S

Quick Start Guide

PC System Requirements

Intel

Pentium

processor or

greater running on

Windows

Platform,

4x CD-ROM drive; 64MB or

more of available RAM;

800x600 color display.

Mac

System Requirements

Mac OS version 10.x;

4x CD-ROM drive; 64MB or

more of available RAM;

800x600 color display.

registered or otherwise, are the property of their respective companies. Disclaimer:

ViewSonic Corporation shall not be liable for technical or editorial reeors or omissions

contained herein; nor for incidental or consequential damages resulting from

furnishing this meterial, or the performance or use of this product. In the interest of

continuing product improvement, ViewSonic Corporation reserves the right to

change product specifications without notice. Information in this CD-ROM may

change without notice, No part of this CD-ROM may be copied, reproduced, or

transmitted by any means, for any purpose without prior written permission of

ViewSonic Corporation.

Y7RXFKB8*0DGHLQ&KLQD

vTouch

User Guide and

Interactive solution Kit