User Guide

Startup the Software

Preparation:

• First of all, perform setup according to the user’s manual supplied with the

projector or the installation manual supplied with the Interactive White Board Kit

or the Touch Module.

• If the computer and the camera unit are not connected by a USB cable, the

message at right would be displayed on and the software would not be started

up.

1. Double click the EyeRIS icon on the desktop.

Driver installation message is displayed on.

Click “OK” and follow the displayed instructions for the sequel operations.

When driver installation is completed properly, EyeRIS Setup Software is

automatically launched and

icon is created in the task tray. Clicking this icon,

EyeRIS setup menu is displayed on the screen.