User Guide

Calibration Menu Display

Perform automatic

calibration

Perform calibration

of the Touch Module

and adjustment by the

adjustment dials A and B.

Select [SINGLE POINTER]

for operation as a mouse.

Select [ MULTI POINTER]

as tapping operation to a

tablet

Indicate

connection status

of the camera unit

and the computer

Switch to the

troubleshooting

screen

Exit EyeRIS

Perform manual

calibration

Select the "Stylus"

when you use the

stylus pen. Select

the "Finger" when

you use the

Touch Module.

Indicate status of the stylus pen or the finger touch operation.

[Calibrated] The stylus pen or the finger touch operation is ready to use

[Not calibrated] Cannot use the stylus pen or the finger touch operation

because calibration is not performed, or the trouble shooting is displayed on

Close EyeRIS Setup Menu.

* The software will continue to run.

It will be displayed when

you detect your software

update. Click here to

update the software.

To active this checkbox of

“disable CPU Idle”.

(for version EyeRIS_3.1.7.0

only)