User Guide

15
Perform Calibration Manually [Manual Calibration]
1. Click [Start Manual] button on the displayed calibration menu.
Projected image on the screen is switched to the Manual Calibration Screen and
red dot is indicated at the top left on the screen.
2. Press the center of the red dot with the stylus pen.
The red dot is indicated at 25 points in order on the screen.
Press briefly on the red dot to calibrate (see top left). Use Stylus.
Press [ESC] to cancel calibration
Press [b] to undo last point
When all points indicated by the red dot are pressed by the stylus pen, calibration
is completed and the calibration completion message is displayed on.