User Guide
17
Troubleshooting Tips:
If the Projection area is not visible due to high ambient light, try reducing and click
"Conrm" to adjust to the reduced or increased exposure settings. Please note that
this adjustment is just to conrm that projection area is fully covered by EyeRIS
sensor and has no correlation with the working of EyeRIS.
Notes:
• For disconnecting the USB cable connecting the computer and the camera unit,
make sure to exit for nishing the software. If the software is remained in run and
the USB cable is disconnected, it may cause of unstable computer motion.
• If a check mark is added to the “Auto Run” in the trouble shooting screen, the
software starts automatically when the computer is started up.
• Drawing software is required to use the interactive white board function.
• Drawing software cannot be downloaded from our projector support page,
prepare commercially available drawing software