User Guide

PJ-WMK-006
Page 5
Installation Manual
Step 3. Separate the upper assembly from the projector mounting bracket by slightly loosening the two tension knurl knobs to create free play
between the bracket tri-lock assembly and the upper section tri-lock assembly points (Figure 2A and 2B).
Step 4. Loosen the security screw knurl knob far enough to allow the two parts to be rotated 180º apart and separate (Figure 2C).
Projector Preparation
Figure 2. Mount Preparation
A B
C
Tri - Lock
Opening
Rotate 180º
to unlock
Safety Knob
Upper
Assembly
Tension
Knobs