User Guide

Page 7
Installation Manual
Secure but do not overtighten the mounting hardware. Overtightening will result in damaging the threads in the projector.
Step 1. Rotate the leveling barrels to level the mounting bracket.
Step 2. Position the mounting bracket so that it avoids most, if not all, ventilation points (including lamp and lter access doors).
Step 3. When the desired position is achieved, tighten the mounting screws to the projector and then tighten the security hex head leg
screw with the M5 Security Allen Wrench (Figure 4).
Leveling the Mounting Bracket
Figure 4. Leveling the Mounting Bracket
Inv
e
r
t
ed
Projector
Leveling
Barrels
Level
DOWN
UP
M5 Security
Allen Wrench
PJ-WMK-006