User Guide

(2) #14 x 2" Wood Screw
Page 8
Installation Manual
Securing the Upper Assembly Ceiling Plate

Use a stud nder to locate a ceiling stud closest to your
desired installation location.

Identify the center of the ceiling stud.

Use a pencil to mark the location of the ceiling stud center.
Minimum of 2 X 4 wood stud to be used

Use a pencil and mark 2 mounting hole locations through
the slots.

Tighten each screw until the ceiling plate is secure against
the ceiling.
Do not overtighten the mounting screws.
Drill a “pilot hole” in the center using a 1/8” drill bit and power drill.
Only use a 1/8” drill bit when drilling the pilot holes.
1
3
2
4
PJ-WMK-006