ViewSonic ® PJ358 LCD Projector - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Guía del usuario - Guida dell’utente - Guia do usuário - Användarhandbok - Käyttöopas - Руководство пользователя - 使用手冊 (繁體) - 使用手冊 (簡體) Model No. : VS11611 Downloaded From projector-manual.
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. lean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in C this guide for further instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright © ViewSonic® Corporation, 2006. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds’ logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Projector PJ358 User's Manual – Operating Guide Contents of package VIDEO (1) Projector RGB ASPECT MAGNIFY ON OFF SEARCH AUTO HOME PAGE UP END PAGE DOWN FREEZE (2) Remote control BLANK VOLUME MUTE KEYSTONE MENU POSITION ENTER ESC with two AA batteries (1) (3) Power cord RESET (2) (4) RGB cable (5) Soft case (3) (4) (5) (6) Quick Start Guide and ViewSonic Wizard CD (7) Lens cover, Rivet and Strap (6) (7) NOTE • Keep the original packing materials for future r
Content Content About this manual. . . . . . . . . . . 1 Content. . . . . . . . . . . . . . . . . . . 2 Projector features. . . . . . . . . . . 3 Preparations. . . . . . . . . . . . . . . 3 Contents of package. . . . . . . . . . . . . 3 Fastening the lens cover. . . . . . . . . . 3 Replacing the filter cover for bottom-up use . . . . . . . . . . . . . . . . 3 Part names. . . . . . . . . . . . . . . . 4 Projector . . . . . . . . . . . . . . .
Projector features / Preparations Projector features This projector has a capability to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. This projector also can give a benefit to mobile users and others by offering a special function named “PC less presentation”.
Part names Part names HOT! (1) (2) (3) (4) Projector (1) Lamp cover The lamp unit is inside. (2) Focus ring (3) Zoom ring (4) Control panel (5) Speaker (6) Elevator knobs (x 2) (7) Elevator feet (x 2) (8) Lens (9) Lens cover (10) Intake vents (11) Filter cover The air filter and intake vent are inside.
Part names Control panel (1) STANDBY/ON button (2) INPUT/ENTER button (3) MENU button It consists of four cursor buttons.
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1024×768.
Setting up WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on its side, front or rear position.
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them.
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector. - Some PCs have multiple screen display modes that may include some signals which are not supported by this projector.
Setting up Using a USB storage In order to view images stored in a USB storage, such as a USB memory stick, insert the device into the USB STORAGE port. For more information, please see the “USB STORAGE”. Turn the projector off prior to removing the USB storage from the USB STORAGE port, to prevent some troubles. Connecting power supply the connector of the power cord into 1. Put the AC inlet of the projector. plug the power cord’s plug into 2. Firmly the outlet.
Remote control Remote control Putting batteries Please set the batteries to the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. the hook part of the battery 1. Holding cover, remove it. and insert the two AA batteries 2. Align according to their plus and minus terminals as indicated in the remote control.
Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1 and Mode 2. If the remote control does not function properly, attempt to change the signal frequency. In order to set the Mode, please keep pressing the combination of two buttons listed below simultaneously for about 3 seconds. (1) Set to Mode 1: MUTE and RESET buttons (2) Set to Mode 2: MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ.
Power on/off Power on/off Turning on the power sure that the POWER indicator turns in 1. Make steady orange and the lens cover is removed. the STANDBY/ON button on the projector or 2. Press the remote control. The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green. To display the picture, select an input signal according to the section “Selecting an input signal”.
Operating VOLUME Operating Adjusting the volume COMPUTER/ VIDEO STORAGE SEARCH AUTO BLANK HOME PAGE UP VOLUME END PAGE DOWN ASPECT 1. Press the VOLUME button on the remote control. A dialog will appear on the screen to aid you in adjusting the volume. Use the ▲/▼ cursor buttons to adjust the volume. To close the dialog and complete the operation, press the VOLUME button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds.
Operating Selecting an input signal (continued) the VIDEO button on the remote control. 1. Press Each time you press the button, the projector switches its VIDEO COMPUTER/ VIDEO STORAGE SEARCH input port as below. S-VIDEO VIDEO ● If the VIDEO button is pushed to switch from a signal from the COMPUTER IN1, COMPUTER IN2 or USB STORAGE port, when TURN ON is selected for the AUTO SEARCH item in the OPTION menu, the projector will check the S-VIDEO port first.
Operating Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally. Using the feet can also tilt the projector in order to project at q a suitable angle to the screen, elevating the front side of the projector within 12 degrees. This projector has 2 elevator feet and 2 elevator knobs. An elevator foot is adjustable while pulling up the elevator knob on the same side as it.
Operating Using the automatic adjustment feature Press the AUTO button on the remote control. 1. Pressing this button performs the following. AUTO For a PC signal The vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically set to default. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted.
Operating Correcting the keystone distortions the KEYSTONE button on the remote control. A dialog 1. Press will appear on the screen to aid you in correcting the distortion. the ▲/▼ cursor buttons to select the AUTO or MANUAL 2. Use operation, and press the ► button to perform the following. KEYSTONE COMPUTER/ VIDEO STORAGE SEARCH AUTO BLANK HOME PAGE UP VOLUME END PAGE DOWN ASPECT MAGNIFY (1) The AUTO executes automatic vertical keystone correction.
Operating Freezing the screen the FREEZE button on the remote control. 1. Press The “FREEZE” indication will appear on the screen, and the FREEZE projector will go into the FREEZE mode. To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.
Operating Using the menu function This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, SCREEN, OPTION and EASY MENU. EASY MENU consists of functions often used, and the other menus are classified into each purpose. Each of these menus is operated using the same methods. The basic operations of these menus are as follows. COMPUTER/ VIDEO STORAGE SEARCH AUTO BLANK HOME PAGE UP VOLUME END PAGE DOWN ASPECT MAGNIFY ON 1.
EASY MENU '#5; /'07 =%1/276'4 ? EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item ASPECT #52'%6 #761 -';5610' ':'%76' -';5610' 2+%674' /1&' %7561/ $4+)*60'55 %1064#56 %1.14 6+06 5*#420'55 9*+52'4 014/#. /+4414 014/#. 4'5'6 (+.6'4 6+/' J .#0)7#)' '0).
EASY MENU EASY MENU (continued) Item BRIGHTNESS CONTRAST COLOR TINT SHARPNESS WHISPER MIRROR Description Using the ◄/► buttons adjusts the brightness. See the BRIGHTNESS item in PICTURE menu. Using the ◄/► buttons adjusts the contrast. See the CONTRAST item in PICTURE menu. Using the ◄/► buttons adjusts the strength of whole color. See the COLOR item in PICTURE menu. Using the ◄/► buttons adjusts the tint. See the TINT item in PICTURE menu. Using the ◄/► buttons adjusts the sharpness.
PICTURE Menu PICTURE Menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item BRIGHTNESS CONTRAST /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.'%6 $4+)*60'55 㧗 %1064#56 㧗 )#//# &'(#7.6 %1.14 6'/2 *+)* %1.
PICTURE Menu PICTURE Menu (continued) Item Description Using the ▲/▼ buttons switches the color temperature mode.
PICTURE Menu PICTURE Menu (continued) Item Description This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER button performs each function.
IMAGE Menu IMAGE Menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.
IMAGE Menu IMAGE Menu (continued) Item Description H PHASE Using the ▲/▼ buttons adjusts the horizontal phase to eliminate flicker. Right ó Left • This item can be selected only for a computer signal or component video signal. H SIZE Using the ▲/▼ buttons adjusts the horizontal size. Large ó Small • This item can be selected only for a computer signal. • When this adjustment is excessive, the picture may not be displayed correctly.
INPUT Menu INPUT Menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.'%6 241)4'55+8' (+./ 8+&'1 04 /+& %1.14 52#%' #761 8+&'1 (14/#6 (4#/' .1%- 6740 1(( %1/276'4 +0 4'51.
INPUT Menu INPUT Menu (continued) Item Description VIDEO FORMAT Set the video format for the s-video port and video port. (1) Use the ◄/► buttons to select the input port. 8+&'1 (14/#6 5 8+&'1 8+&'1 (2) Using the ▲/▼ buttons switches the mode #761 for video format. 065% 2#. AUTO ó NTSC ó PAL ó SECAM 5'%#/ 065% N-PAL ó M-PAL ó NTSC4.43 / 2#. 0 2#. • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port.
INPUT Menu INPUT Menu (continued) Item Description The resolution for the COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button. 4'51.76+10 The RESOLUTION menu will be displayed. (2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
SETUP Menu SETUP Menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button on the ENTER button to execute the item. Then perform it according to the following table. Item /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.'%6 #761 -';5610' ':'%76' -';5610' 9*+52'4 014/#. /+4414 014/#. 81.
SETUP Menu SETUP Menu (continued) Item WHISPER Description Using the ▲/▼ buttons turns off/on the whisper mode. NORMAL ó WHISPER • When the WHISPER is selected, acoustic noise and screen brightness are reduced. Using the ▲/▼ buttons switches the mode for mirror status. MIRROR NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm will be displayed when projector is restarted after the power switch is turned off.
SCREEN Menu SCREEN Menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.'%6 .#0)7#)' '0).+5* /'07 215+6+10 $.#0- $.#% 56#46 72 14+)+0#. /[5ETGGP /[5ETGGP .
SCREEN Menu SCREEN Menu (continued) Item Description Using the ▲/▼ buttons switches the mode for the start-up screen. The start-up screen is a screen displayed when no signal or an unsuitable signal is detected. MyScreen ó ORIGINAL ó TURN OFF START UP MyScreen ORIGINAL TURN OFF Feature Screen can be registered by the MyScreen item. Screen preset as the standard screen. Plain black screen.
SCREEN Menu SCREEN Menu (continued) Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start capturing an image from the current screen.
SCREEN Menu SCREEN Menu (continued) Item Description MESSAGE Using the ▲/▼ buttons turns on/off the message function. TURN ON ó TURN OFF When the TURN ON is selected, the following message function works. “AUTO IN PROGRESS” while automatically adjusting “NO INPUT IS DETECTED” “SYNC IS OUT OF RANGE” “Searching….” while searching for the input “Detecting….
OPTION Menu OPTION Menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table. Item AUTO SEARCH /'07 =%1/276'4 ? 2+%674' +/#)' +0276 5'672 5%4''0 126+10 '#5; /'07 5'.
OPTION Menu OPTION Menu (continued) Item Description Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO OFF AUTO OFF ENABLE AUTO OFF DISABLE 1 0 When the time is set to 0, the projector is not turned off automatically. When the time is set to 1 to 99, and when the passed time with nosignal or an unsuitable signal reaches at the set time, the projector lamp will be turned off.
OPTION Menu OPTION Menu (continued) Item MY BUTTON Description This item is to assign one of the following function to MY BUTTON 1 and 2 on the remote control. Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button. • COMPUTER1: Sets port to COMPUTER IN1. • COMPUTER2: Sets port to COMPUTER IN2. • USB STORAGE: Sets port to USB STORAGE. • S-VIDEO: Sets port to S-VIDEO. • VIDEO: Sets port to VIDEO.
OPTION Menu OPTION Menu (continued) Item Description AUTO ADJUST Using the ▲/▼ buttons enables/disables the #761 #&,756 automatic adjustment. When DISABLE is selected, (+0' (#56 the automatic adjustment feature is disabled, &+5#$.' although rough adjustment is automatically performed depending on the basic setting. FINE ó FAST ó DISABLE FINE: Finer tuning including H.SIZE adjustment. FAST: Faster tuning, setting H.
OPTION Menu OPTION Menu (continued) Item Description KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When TURN ON is selected, the buttons on the projector except the STANDBY/ON button are locked. TURN ON ó TURN OFF • Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control. SERVICE (continued) REMOTE FREQ. Use the ▲/▼ button to change the Projector's remote sensor setting. 1:NORMAL ó 2:HIGH Items with a checkmark are on.
OPTION Menu OPTION Menu (continued) Item Description This projector is equipped with security functions. User registration is required before using the security functions. Please contact your local dealer. 1. Using Security Features 1.1 Inputting the PASSWORD SECURITY 1.1-1 Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 5606. This PASSWORD can be changed (1.2 Changing the PASSWORD).
OPTION Menu OPTION Menu (continued) Item Description 1.3 If you have forgotten your PASSWORD 1.3-1 Follow the procedure in 1.1-1 to display the ENTER PASSWORD BOX. 1.3-2 While the ENTER PASSWORD BOX is displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds The 10 digit Inquiring Code will be displayed. • If there is no key input for about 55 seconds while the Inquiring Code is displayed the menu will close.
OPTION Menu OPTION Menu (continued) Item Description 2.2-4 Move the cursor to the right side of the CHECK PASSWORD BOX and press the /[5ETGGP ► button to display the PASSWORD for %1/2.'6' about 20 seconds, please make note of the PASSWORD during this time. '06'4 Pressing the ENTER button will return to MyScreen PASS WORD on/off menu. When a PASSWORD is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable.
OPTION Menu OPTION Menu (continued) Item SECURITY (continued) Description 3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX 2+0 $1: +PRWV 2+0 %QFG will be displayed. 3.1-3 Input a 4 part PIN Code using the ▲, ▼, %1/276'4 ◄, ►, COMPUTER/STORAGE and INPUT 2+0 $1: buttons. %QPHKTOCVKQP A CONFIRMATION BOX will appear.
OPTION Menu OPTION Menu (continued) Item Description 4. Using the Transition Detector Function While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below. • Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. • Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.
OPTION Menu OPTION Menu (continued) Item Description 4.3 Setting the Transition Detector off 4.3-1 Follow the procedure in 4.1-1 to display the Transition Detector on/off menu. 4.3-2 Select TURN OFF to display the ENTER PASSWORD BOX (large). Enter the registered PASSWORD and the screen will return to the Transition Detector on/off menu. If an incorrect PASSWORD is input the menu will close. If necessary repeat the process from 4.3-1. SECURITY (continued) 4.4 If you have forgotten your PASSWORD 4.
USB STORAGE USB STORAGE This projector has “PC Less presentation” feature that can display following files stored in USB storage or display as thumbnail without connecting PC. NOTE 1 • Compliant file format File Format JPEG M-JPEG (Motion-JPEG) MPEG4 Maximum pixel size 8176 x 8176 640 x 480 352 x 288 Progressive JPEG file cannot be reproduced. Some JPEG files may not possible to display the image clearly. • Compliant Audio format Audio Format 8bit or 16bit linear PCM μ-law IMA-ADPCM 4bit G.
USB STORAGE Displaying Thumbnail Menu (continued) Thumbnail Display Menu 2, %10641. /'07 +0276 5'.'%6 ↹ CDEFGHIJ ↹ CDEFGHIJ ↹ CDEFGHIJ 6*7/$0#+. +/#)' #NN 2CIG 7R ↹ CDEFGHIJ ↹ CDEFGHIJ ↹ 2CIG &QYP CDEFGHIJ 5.+&' 5*19 2.#; ↹ CDEFGHIJ ↹ CDEFGHIJ ↹ CDEFGHIJ 56#46 5612 +06'48#. U /1&' 10' 6+/' ↹ CDEFGHIJ ↹ CDEFGHIJ ↹ CDEFGHIJ 5%4''0 '(('%6 5'.
USB STORAGE Displaying Thumbnail Menu (continued) Message No Media Broken Media Bad format Media loading Ready Description USB storage is not inserted into USB STORAGE slot on the projector. This is an alarm message that USB storage inserted into USB STORAGE slot on the projector is broken. This is an alarm message that USB storage inserted into USB STORAGE slot on the projector has a noncompliant format. Loading files in the USB storage inserted into USB STORAGE slot on the projector.
USB STORAGE Displaying Thumbnail image Image files in USB storage can be seen as thumbnail display. Use ▲, ▼, ◄ and ► buttons to move a cursor to THUMBNAIL item in Thumbnail menu. Push ENTER button on the remote control or INPUT/ENTER button on the projector to decide it. Menu Thumbnail Display 2, %10641. /'07 +0276 5'.'%6 ↹ Selected image CDEFGHIJ ↹ CDEFGHIJ ↹ CDEFGHIJ 6*7/$0#+. +/#)' #NN 2CIG 7R ↹ CDEFGHIJ ↹ CDEFGHIJ ↹ 2CIG &QYP CDEFGHIJ 5.
USB STORAGE Displaying Thumbnail image (continued) NOTE 3 • Up to 999 files can be displayed • Files are sorted in the following order. 1) Symbols, 2) Numbers, 3) Characters • File name can be displayed up to 16 characters including file extension. • The characters of following languages can be used for file name. If other languages are used, the file name is not displayed properly, but the content can be displayed.
USB STORAGE Playing Slide show SLIDE SHOW can displays a full screen image and change it to the next one in desired interval time. Use ▲, ▼, ◄ and ► buttons to move a cursor to SLIDE SHOW item in Thumbnail menu. push ENTER button on the remote control or INPUT/ENTER button on the projector to decide it. SLIDE SHOW items Item Description PLAY Starts “SLIDE SHOW”. Select [PLAY] using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remote control or INPUT/ENTER button on the projector.
USB STORAGE Playing Slide show (continued) SLIDE SHOW items (continued) Item Description MODE Select SLIDE SHOW playing at ONE TIME or ENDLESS. 1. Select [MODE] using ▲, ▼, ◄ and ► buttons, then push ENTER button on the remote control or INPUT/ENTER button on the projector, so that [MODE] setting can be selected. 2. Change [MODE] setting using ▲ and ▼buttons. ENDLESS ONE TIME ó (Playing Slide Show (Playing Slide Show only one time) endless) 3.
USB STORAGE Displaying an image in full screen One selected image file on Thumbnail menu can be displayed in full screen. Use ▲, ▼, ◄ and ► buttons to move a cursor to select an image on Thumbnail menu. Then, push ENTER button on the remote control or INPUT/ENTER button on the projector to display the selected image in full screen. While in full screen mode, if one of these buttons is pushed one more time, the projector is back to Thumbnail display. 2, %10641. /'07 +0276 5'.
USB STORAGE Displaying an image in full screen (continued) 2) Button operation for motion picture While motion picture is shown in full screen, the following operation can be made from the control panel on the projector or the remote control. Button Operation UP Pause and play motion picture. Play ó Pause DOWN Play motion picture slowly. (half speed) Play ó Play slowly (half speed) RIGHT Fast-forward motion picture.
Maintenance Maintenance Lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. To prepare a new lamp, contact your dealer and tell the lamp type number. Type number : RLC-027 Replacing the lamp The lamp cover the projector off, and unplug the power cord. 1.
Maintenance Lamp (continued) Lamp warning HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them.
Maintenance Air filter Please check and clean the air filter periodically. When the indicators or a message prompts you to clean the air filter, comply with it as soon as possible. Replace the air filter when it is damaged or too soiled. To prepare a new air filter, contact ViewSonic and tell the air filter type number. When you replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. Cleaning the air filter 1. 2. 3.
Maintenance Other care Inside of the projector In order to ensure the safe use of your projector, please have it cleaned and inspected by your dealer about once every year. Caring for the lens If the lens is flawed, soiled or fogged, it could cause deterioration of display quality. Please take care of the lens, being cautious of handling. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
Troubleshooting Troubleshooting If an abnormal operation should occur, stop using the projector immediately. WARNING ►Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur. In such cases, immediately disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company.
Troubleshooting Regarding the indicator lamps When operation of the LAMP, TEMP and POWER indicators differs from usual, check and cope with it according to the following table. POWER LAMP TEMP Description indicator indicator indicator Lighting Turned Turned The projector is in a standby state. In Orange Please refer to the section “Power on/off”. off off Blinking In Green Turned off Turned off The projector is warming up. Please wait.
Troubleshooting Regarding the indicator lamps (continued) POWER LAMP TEMP indicator indicator indicator Description There is a possibility that the interior portion has become heated. Blinking In Red or Lighting In Red Turned off Lighting In Red Please turn the power off, and allow the projector to cool down at least 20 minutes. After the projector has sufficiently cooled down, please make confirmation of the following items, and then turn the power on again.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect The electrical power cord is not plugged in. Correctly connect the power cord. The main power source has been interrupted during operation such as by a power outage (blackout), etc. Power does not come on.
Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The brightness is adjusted to an extremely low level. Adjust BRIGHTNESS to a higher level using the menu function or the remote control. No pictures are displayed. (continued) The computer cannot detect the projector as a plug and play monitor. Make sure that the computer can detect a plug and play monitor using another plug and play monitor.
Specifications Specifications Item Product name Liquid Panel size Crystal Drive system Panel Pixels Lens Lamp Speaker Power supply Power consumption Temperature range Size Weight (mass) Ports 205 Optional parts Specification Liquid crystal projector 1.6 cm (0.63 type) TFT active matrix 786,432 pixels (1024 horizontal x 768 vertical) Zoom lens F=1.8 ~ 1.9 f = 16.4~ 19.7 mm 160W UHB 1 W x1 AC100-120V/2.8A, AC220-240V/1.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. T=Telephone Country/Region Web Site United States www.viewsonic.com/support/ Canada www.viewsonic.com/support T= 866 463 4775 service.ca@viewsonic.com United Kingdom www.viewsoniceurope.com/uk T= 0207 949 0307 service.eu@viewsoniceurope. com Europe, Middle East, Baltic countries, and North Africa www.viewsoniceurope.
Limited Warranty VIEWSONIC® PROJECTOR What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
2. T o obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic. 4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic. 5. For applicable models with the PIN code security feature only.
Downloaded From projector-manual.
