User guide

ViewSonic PJ502 12
Connecting power supply
1. Connect the connector of the power cord to the AC inlet of the projector.
2. Firmly plug the power cord's plug into the outlet.
WARNING
X Please use extra caution when connecting the power cord as incorrect or faulty con-
nections may result in fire and/or electrical shock.
* Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
* Only plug the power cord into an outlet rated for use with the power cord's specified volt-
age range.
* Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
AC Inlet
Connector of the
power cord