User guide

ViewSonic PJ502 3
Part names
Projector
NOTE (*) About Restart switch: This Projector is controlled by an internal microprocessor.
Under certain exceptional circumstances, the projector may not operate correctly and the
microprocessor will need to be reset. In such a case, please push the Restart switch by using
a cocktail stick or similar and the projector will restart. Only push the Restart switch in these
exceptional instances.
Controls
(See the following
page.)
Remote control sensor
Speaker
Elevator button (right)
Restart switch (*)
Power switch
AC inlet
Elevator button (left)
Elevator foot (left)
Vents
Filter cover
(Air filter and Intake vent
are inside.)
Front-Right side
Zoom knob
Focus ring
Lens cover
(Lens is inside)
Input ports
AUDIO
S-VIDEO
COMPONENT VIDEO
VIDEO
CONTROL port
Elevator foot (right)
Rear-Left side
Bottom side
(Y)
(Cb/Pb)
(Cr/Pr)
RGB
Kensington lock slot
Lamp cover
(Lamp unit is inside.)