Operation Manual

40
Function Description
Advanced
Color
See "Adjusting Color" on page 29 for details.
Tint
See "Adjusting Tint" on page 29 for details.
This function is only available when a Composite video
or S-Video input signal with NTSC system is selected.
Sharpness
See "Adjusting Sharpness" on page 29 for details.
Gamma
See "Selecting a gamma setting" on page 29 for details.
Brilliant Color
See "Adjusting Brilliant Color" on page 29 for details.
Noise Reduction
See "Reducing image noise" on page 29 for details.
Color Management
See "Color Management" on page 30 for details.
Reset Color
Settings
Returns all color settings to the factory preset values.
Quick Auto
Search
See "Switching input signal" on page 24 for details.
3D Settings See "Using the 3D functions" on page 33 for details.
Standby
Settings
See "Using the projector in standby mode" on page 34 for
details.
Auto Power On
Computer
Selecting Enable allows the projector to turn on automatically
once the VGA signal is fed through the VGA cable.
CEC
See "Using the CEC function" on page 33 for details.
Direct Power On
Selecting On allows the projector to turn on automatically
once the power is fed through the power cord.
2. PICTURE menu
3. SOURCE menu