Operation Manual

13
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
Important
• In the connections shown above, some cables may not be included with the projector
(see "Package contents" on page 2). They are commercially available from electronics
stores.
• The connection illustrations above are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
• For detailed connection methods, see pages 14-16.
1. HDMI cable 2. VGA (D-Sub) to HDTV (RCA) cable
3. VGA to DVI-A cable 4. USB cable
1
2
3
4
HDMI
MINI
USB
RS-232
COMPUTER IN