Operation Manual

30
Zoom
Using the remote control
1. Press on the remote control to display the Zoom bar.
2. Press / to magnify the picture to a desired size.
3. Press repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press Enter to switch to the paning mode and press the
directional arrows ( , , , ) to navigate the picture.
5. To reduce size of the picture, press Enter to switch back to the zoom in/out
functionality, and press Auto Sync to restore the picture to its original size. You
can also press repeatedly until it is restored to the original size.
Using the OSD menu
1. Press Menu and then press until the DISPLAY menu is highlighted.
2. Press to select Zoom and press Enter. The Zoom bar displays.
3. Repeat steps 3-5 in the section of Using the remote control above.