Operation Manual

33
SOURCE
Quick Auto Search
Automatically scan through all the input source if the function in the OSD menu is On.
The function will stop the signal auto scan process and fix the signal source you
preferred if you turn Off the Quick Auto Search.
3D Settings
This projector features a 3D function which enables you to enjoy the 3D movies, vid-
eos, and sporting events in a more realistic way by presenting the depth of the
images. You need to wear a pair of 3D glasses to view the 3D images.
3D Sync
When you discover the inversion of the image depth, enable this function to correct
the problem.
3D Sync Invert
When you discover the inversion of the image depth, enable this function to correct
the problem.
Auto Power On
Computer
Selecting Enable the projector will turn on automatically when COMPUTER signal is
detected.
CEC
This projector supports CEC (Consumer Electronics Control) function for synchro-
nized power on/off operation via HDMI connection. That is, if a device that also sup-
ports CEC function is connected to the HDMI input of the projector, when the
projector’s power is turned off, the power of the connected device will also be turned
off automatically. When the power of the connected device is turned on, the projector’s
power will be turned on automatically.
Note
• When connected to the HDMI input of the projector via an HDMI cable, and its CEC
function is turned on.
• Depending on the connected device, the CEC function may not work.
• The function can't be enabled when Active VGA/Audio out function is disabled.
Direct Power On
Selecting On the projector will turn on automatically after the power cord has been
connected and power has been applied.
Auto Power Off
Power Saving