Operation Manual

34
The projector lowers the projector power if no input source is detected after 5 minutes
to prevent unnecessary waste of lamp life. You can further decide if you would like the
projector to turn off automatically after a set period of time.
When Disable is selected, the projector power will be reduced to 30% after no signal
is detected for 5 minutes.
If you select 10 min, 20 min or 30 min, the projecter power will be reduced to 30%
after no signal is detected for 5 minutes. And when 10 min, 20 min or 30 min is up,
the projector will turn off automatically.
Sleep Timer
This function allows the projector to turn off automatically after a set period of time to
prevent unnecessary waste of lamp life.
Smart Restart
It takes some time to initate this function. Make sure the projector has been turned on
for more than 4 minutes. If the projector is resumed by using the Smart Restart fea-
ture, this function can be executed immediately.
Quick Power Off
• ON: Quick power on function speeds up the cooling process when turning off the
projector.
• OFF: Turn off with cooling procedure.
Note
• When Desable is selected, the Smart Restart function will be automatically turned OFF.