Owner's Manual

Introduction

Projector Features

The projector integrates high-performance optical engine projection and a user - friendly

design to deliver high reliability and ease of use.

The projector offers the following features:

• Single chip 0.55" Texas Instruments DLP

technology

• PJD6345: XGA (1024x768 pixel)

• Single chip 0.65" Texas Instruments DLP

technology

• PJD6544w: WXGA (1280x800 pixel)

• Compatibility with Macintosh

computers

• Compatibility with NTSC, PAL, SECAM and HDTV

• D-Sub 15-pin terminal for analog video connectivity

• User-friendly, multi-language on-screen display

• Advanced electronic keystone correction

• RS-232 connector for serial control

• HDMI 1.4a support

• PJLink

compatible

• Support remote control with Crestron software

• LAN display 4-1 (maximum 4 PC/ NB / smart phone / smart Pad display to 1

projector)

• USB display supports computer connection via USB mini-B type to A type cable

• Support USB flash drive for Photo / Video / music playback and office viewer

function

• DynamicEco Timer function decreasing the power consumption of the lamp by up to

70% when no input signal can be detected for a set period of time.

• Selectable quick power off function

• Switchable normal and economic modes to reduce the power consumption

• Support 3D DLP link technology

• Less then 0.5w power consumption in standby mode.

Note

• The information in this manual is subject to change without notices.

• The reproduction, transfer or copy of all or any part of this document is not permitted

without express written consent.

• The apparent brightness of the projected image will vary depending on the ambient

lighting conditions, selected input signal contrast/brightness settings, and is directly

proportional to projection distance.

• The lamp brightness will decline over time and may vary within the lamp manufacturers

specifications. This is normal and expected behavior.