User Guide

Using the remote mouse control

The capability of operating your computer with the remote control gives you more

flexibility when delivering presentations.

1. Connect the projector to your PC or notebook with a USB cable prior to using the

remote control in place of your computer’s mouse. See "Connecting a computer" on

page 15 for details.

2. Set the input signal to D-Sub / Comp. 1, D-Sub / Comp. 2.

3. Press Mouse on the remote control to switch from the normal mode to the mouse

mode. An icon appears on the screen to indicate the activation of the mouse mode.

4. Perform the desired mouse controls on your remote control.

• To move the cursor on the screen, press / / / .

• To left-click, press .

• To right-click, press .

• To operate your display software program (on a connected PC) which responds to

page up/down commands (like Microsoft PowerPoint), press PgUp/PgDn.

• To return to the normal mode, press Mouse again or other keys except for the

mouse related multi-function keys.

Remote control effective range

The Infra-Red (IR) remote control is located on the front

of the projector. The remote control must be held at an

angle within 30 degrees perpendicular to the projector's

IR remote control sensor to function correctly. The

distance between the remote control and the sensor should

not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote

control and the IR sensor on the projector that might

obstruct the infra-red beam.