User guide

46
Web Management
Projector Information
LAN Setting
Projector Status and Control
E-mail Setting
Security Setting
Firmware Update
Network Firmware Version: Gen_v0.62
Update
Firmware Update
Firmware update will take about a minute. Do not interrupt the process
once it has begun. Keep the connection established until completion
of process. The network system will auto reboot and you can re-login
after update is complete.
Cancel
Login Page
`
Administrator Password: Enter the Administrator Password and click Login
button.
Firmware Update Page
`
Use the Firmware Update page to update your projector’s rmware. Press
Update button to start.
1. Please wait till the count reaches 0.
Web Management
Projector Information
LAN Setting
Please wait for 3 seconds.
Waiting 1
2. Wait for 3 seconds and it will proceed to the next step automatically.
Web Management
Projector Information
LAN Setting
Please wait for 3 seconds.
Continue
Welcome to Web Management.
Projector Name:
IP Address:
Administrator Password:
Login
Projector Information
D21211
192.168.0.100
Web Management
http://www.pureglare.com.au