PLED-W600/PLED-W800 LED Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic.
Thank you for choosing ViewSonic With over 25 years as a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration 0.1% < 0.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9.
Copyright Information Copyright © ViewSonic Corporation, 2014. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic and the three birds logo are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC are trademarks of VESA.
Product Registration To fulfill possible future product needs, and to receive additional product informationas it becomes available, please visit your region section on ViewSonic’s website to register your product online. The ViewSonic CD also provides an opportunity for you to print the product registration form. Upon completion, please mail or fax to a respective ViewSonic office. To find your registration form, use the directory “:\CD\Registration”.
Table of Contents Introduction Viewing System Settings....................... 24 7 USB Display.......................................... 25 Package Overview.................................. 7 Wi-Fi Display......................................... 26 Product Overview.................................... 8 Configure Wireless Connection (via AP mode)........................................ 27 Remote Control.......................................
Introduction Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact our customer service.
Product Overview 18 20 21 1 9 2 8 COLOR 3 7 MENU/ EXIT ER SO W U R PO C E AUDIO 19 4 10 11 12 AUDIO AV IN OUT 13 SD CARD 5 14 15 HDMI/MHL USB 16 15 14 11 SERVICE HDMI/MHL AUDIO OUT 10 PLED-W600 PLED-W800 COMPUTER PLED-W800 17 1. Kensington Lock 2. Focus Dial 3. Left Button / Audio - ( ) 4. Power Button ( ) 5. Down Button / Audio mode ( 6. Source Button (SOURCE) 7. Right Button / Audio + ( ) 8. Menu Button (MENU) 9. Up Button / Color mode ( ) 10.
Remote Control 1 1. Power 2. My Button 3. HDMI* 4. Computer* 5. Media/USB* 6. Auto Sync* 7. Source* 8. Up / Keystone 9. Enter 10. Left 11. Right 12. Down / Keystone 13. Menu 14. Pattern 15. Exit 16. Rewind* 17. Previous* 18. Next* 19. Fast Forward* 20. Pause* 21. Play* 22. Stop* 23. Freeze 24. Volume + 25. Keypad Lock 26. Blank 27. Volume 28. Magnify +/29. Color Mode 30. Audio Mode 31.
Installation Power On/Off 1. Connect the power cord to the DC input jack of the projector. 2. Inset the plug at the end of the power cord into a power outlet. The status LED lights red in standby mode. 3. Press the Power button ( ) to turn the projector on or off. The status LED turns green when the projector is turned on. Adjust Projected Image Height The projector is equipped with an elevator foot for adjusting the projected image height.
Adjust the Projected Image SCREEN SIZE 16:10 Screen (D) (inch) 24 32 40 48 56 64 72 80 100 PROJECTION DISTANCE (A) (meter) 0.61 0.81 1.02 1.22 1.42 1.63 1.83 2.03 2.54 (inch) 28.5 38.0 47.5 57.0 66.5 76.0 85.5 95.0 118.7 (meter) 0.72 0.96 1.21 1.45 1.69 1.93 2.17 2.41 3.02 Adjust the focus until the image is clear.
Connect Input Source - HDMI/MHL or COMPUTER HDMI/MHL Connection Connect to Notebook/Computer Connect to Mobile Devices COMPUTER Connection (PLED-W800 only) Connect to Notebook/Computer 1. Connect the COMPUTER / HDMI device using an appropriate cable. 2. After powering on the projector, press the SOURCE button on the control panel or the HDMI/COMP. button on the remote control to select the appropriate input source.
Connect Input Source - Composite AV IN (PLED-W800 only) *AV cable is an optional accessory For video and audio input TM Connect to DVD player Connect to iPod Touch 5 1. Connect the AV input source. 2. After powering on the projector, press the SOURCE button on the control panel to select the appropriate input source.
Insert USB Flash Drive (PLED-W800 only) Plug a USB flash drive into the USB connector at the back of projector. Supports USB flash drive with FAT32 and NTFS formats. Mount the Projector Screw a standard tripod into the screw hole on the projector. Screw hole for tripod *Standard Tripod The tripod is an optional accessory.
Using Multimedia Menu (PLED-W800 only) How to Use the Multimedia Menu Home menu Remote Control Up Button Enter Button Right Button Left Button Down Button Menu Button Press p / q to select the menu item that you want to access and press Enter/ u to enter the menu screen. Exit Button Control Panel Up Button Menu Button / Exit Button Note A button guide appears on the bottom of most screens. The guide varies depending on the current mode.
Multi-Media submenu Photo menu Video menu Audio menu Document menu Internal Memory Internal Memory is a form of computer data storage. File Transfer File Transfer can transfer your computer's data to the projector's internal memory by using a single USB cable (A type to A type). Your computer will detect the projector's "Internal Memory" as a storage device. 1. In Multi-Media mode, select Smart Display > USB Display. Refer to "USB Display" on page 25. 2.
Viewing Photos To view photos from the USB flash drive or SD card, do the following: 2.
Full Screen Display If the slide show function is enabled, photos are played continuously at specified intervals. The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. To change the slideshow settings, see Photo Settings below. Use t/u to navigate between the button options. Press Enter to select the menu item. Press Exit to return thumbnail view.
Playing Videos To play videos from the USB flash drive or SD card, do the following: 2. Select Data Source Enter Home Menu Change data source COLOR COLOR MENU/ EXIT MENU/ EXIT AUDIO AUDIO COLOR MENU/ EXIT AUDIO Select [Video] COLOR MENU/ EXIT AUDIO Select Video File COLOR MENU/ EXIT Playback File AUDIO COLOR MENU/ EXIT AUDIO Video Playback mode COLOR MENU/ EXIT AUDIO The displayed screen may vary depending on the data source selected in the previous step.
Video Playback Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. During video playback, press / on the remote control or / on the control panel to adjust the volume. Press Enter to select the menu item. Press Exit to return video file list.
Playing Music To play music from the USB flash drive or SD card, do the following: 2. Select Data Source Enter Home Menu Change data source COLOR COLOR MENU/ EXIT MENU/ EXIT AUDIO AUDIO COLOR MENU/ EXIT AUDIO Select [Audio] COLOR MENU/ EXIT AUDIO Select Audio File COLOR MENU/ EXIT Playback File AUDIO COLOR MENU/ EXIT AUDIO Music Playback mode COLOR MENU/ EXIT AUDIO The displayed screen may vary depending on the data source selected in the previous step.
Music Playback Mode During music playback, press / volume. Press Exit to return music file list.
Viewing Documents To view documents from the USB flash drive or SD card, do the following: 2. Select Data Source Enter Home Menu Change data source COLOR COLOR MENU/ EXIT MENU/ EXIT AUDIO AUDIO COLOR MENU/ EXIT AUDIO Select [Document] COLOR MENU/ EXIT AUDIO Select File COLOR MENU/ EXIT View File AUDIO COLOR MENU/ EXIT View mode AUDIO COLOR MENU/ EXIT AUDIO The displayed screen may vary depending on the data source selected in the previous step.
View Mode The button guide disappears when the keypad is not used for 3 seconds. To display the button guide, press any key. Use t/u to navigate between the button options. Press Enter to select the menu item. Press Exit to return document file list.
USB Display To project your computer screen, do the following: When using USB Display function for the first time, install the software and execute: For Windows OS: vPresenter_USB_Win.exe. For Macintosh OS: vPresenter_USB_Mac-And-Driver-Installer. Extend display is not available on Windows 8/8.1.
Wi-Fi Display When using Wi-Fi Display function for the first time, download and install the vPresenter application into your mobile device. Download and install vPresenter application from Play Store, APP Store, or PLED-W800 server. Extend display is not available on Windows 8/8.1.
Configure Wireless Connection (via AP mode) To access the SmartDisplay on your device via AP mode connection, do the following: Plug in the Wi-Fi Dongle Enter Home Menu (Wi-Fi dongle is an optional accessory) COLOR MENU/ EXIT AUDIO Select [WiFi] Select [Settings] Select [AP Mode] COLOR COLOR MENU/ EXIT MENU/ EXIT AUDIO AUDIO COLOR MENU/ EXIT AUDIO Enter AP Mode Page. Select [ON] to enable the function. Configure the settings. Then select OK to save the settings.
Configure Wireless Connection (via Client mode) To access the SmartDisplay on your device via Client mode connection, do the following: Plug in the Wi-Fi Dongle Enter Home Menu (Wi-Fi dongle is an optional accessory) COLOR MENU/ EXIT AUDIO Select [WiFi] Select [Settings] Select [Client Mode] COLOR COLOR MENU/ EXIT MENU/ EXIT AUDIO AUDIO COLOR MENU/ EXIT AUDIO Configure the settings. Then select OK to save the settings. Enter AP Mode Page. Select [ON] to enable the function.
Media Streaming When using media streaming function for the first time, download and install the BubbleUPnP (Play Store) or iMediaShare (App Store) application into your mobile device. Enter Home Menu Plug in the Wi-Fi Dongle Select [Smart Display] COLOR MENU/ EXIT AUDIO COLOR MENU/ EXIT AUDIO Enter Media Streaming Page Select [Media streaming] On your mobile device, enable Wi-Fi function and then select the dongle name listed in the Wi-Fi Network Connection list.
Screen Mirroring With Screen Mirroring function, you can mirror the compatible mobile device screen onto the projected screen wirelessly. This function only works with compatible mobile devices that support Miracast, Media Output, or Screen Mirroring options. The configuration on the connection procedures vary depending on the mobile device UI design. Follow the instructions below to connect LG Optimus G Pro mobile phone to your projector.
Adjust Menu Settings for External Input Source Selecting Input Source Once a video source device is connected and turned on, press Source on the remote control or SOURCE on the control panel to automatically switch the input source. Available sources are in the following order: 1. HDMI/MHL 2. Video (PLED-W800 only) 3. COMPUTER (PLED-W800 only) 4. Media/USB (PLED-W800 only) The last start position in the list is determined by the last connected input source.
Menu Items (PLED-W800) DISPLAY menu PICTURE menu SETTING menu OPTIONS menu Menu Items (PLED-W600) DISPLAY menu PICTURE menu SETTING menu OPTIONS menu 32
Using the Main Menu Refer to the below table for details on menu items. Some of the menu options are not available on PLED-W600 projector. Menu Menu option Aspect Ratio Overscan Digital Zoom Auto Image Adjust DISPLAY Manual Image Adjust Color Temperature Brilliant Color Color Mode Brightness Contrast Sharpness Saturation PICTURE Tint Advanced Description Select the aspect ratio of the display. Available options: AUTO / 4:3 / 16:9 / 16:10 Enable overscan display (only for HDMI input signal).
Menu Menu option Description Select the projector position. Available options: Front Table / Rear Table / Front Ceiling / Rear Ceiling Set the display position of the OSD menu. Menu Position Available options: Center / Top-Left / Top-Right / Bottom-Left / BottomRight Automatically adjust the trapezoidal (keystone) distortion of the Auto projected image. Keystone Available options: Off / On Manually adjust the trapezoidal (keystone) distortion of the projected Manual image.
Appendix Media File Support List (PLED-W800 only) Image Image Format Profile Baseline JPEG Progressive BMP No Limit Color Space Size Limitation YUV400 YUV420 YUV422 YUV440 YUV444 YUV400 YUV420 YUV422 YUV440 YUV444 No Limit 8000*6000 8000*6000 8000*6000 8000*6000 8000*6000 Width <= 8000 & Height <= 6000 8000*6000 Audio Audio Format MP1/MP2/MP3 WMA OGG ADPCM-WAV PCM-WAV AAC Sample Rate(KHz) 8-48 22-48 8-48 8-48 8-48 8-48 Bit Rate(Kbps) 8-320 5-320 64-320 32-384 128-1536 8-256 Voice Record File For
Video File Extensions Audio/Video Profile/Level Support Up to 1080P 30fps 80Mbps Up to High Profile, Levels 1- 4.1 (1080P 30fps 25Mbps) Codec MJPEG H.264/AVC DivX4/5/6 XVID Video WMV3 (WMV Ver9) .avi .divx .
File Extensions Audio/Video .ts Audio Video .dat .vob .mpg .mpeg Audio Video .mov .mp4 Audio Video .rm .rmvb Audio Video .
Subtitle Format Font Subtitle Size Standard SRT SMI SSA/ASS UTF-8 / UTF-16 8bits up to 800*600 DO NOT support mixed code in subtitle files. Picsel Office Viewer File Format Support Version PDF 1.0 PDF 1.1 PDF 1.2 Adobe PDF PDF 1.3 PDF 1.4 British Word 95 Word 97, 2000, 2002, 2003 MS Word Word 2007(.docx), 2010(.
Storage Storage Internal Memory USB SD Card Device type File system TLC/MLC/SLC 8/12/24/40/60 bit ECC FAT16, FAT32 NAND USB Flash,USB-HardDisk NTFS, ExFAT DHC,SDXC 39 File&Dir Level Support Max 999 directories and Max 9,999 Files Support atmost 10th level directory
Specifications Model Name PLED-W600 PLED-W800 Projection system DLP® Resolution WXGA (1280 x 800) Computer compatibility IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, SVGA, VGA, WXGA Video compatibility - Aspect ratio Auto, 4:3, 16:9, 16:10 Displayable colors 1.07 billion colors Projection lens F# 1.5, f = 13.92 mm Projection screen size 30” - 80” text 30”~100” video Projection distance 0.7 m – 3.0 m Throw ratio 1.
Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local retailer or service center. Image Problems P No image appears on-screen • Ensure the power cord is correctly and securely connected. • Ensure the pins of connectors are not crooked or broken. • Make sure the projector is switched on. P Image is out of focus • Adjust the Focus Dial.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. T = Telephone Email C = CHAT ONLINE Australia AUS= 1800 880 818 www.viewsonic.com.au service@au.viewsonic.com New Zealand NZ= 0800 008 822 T (Toll-Free)= 1-866-463-4775 Canada www.viewsonic.com service.ca@viewsonic.com T (Toll)= 1-424-233-2533 Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-desk/ Hong Kong www.hk.viewsonic.
Limited Warranty ® ViewSonic Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
How to get service: 1. For information about receiving service under warranty, contact ViewSonic Customer Support (Please refer to Customer Support page). You will need to provide your product's serial number. 2. To obtain warranty service, you will be required to provide (a) the original dated sales slip, (b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product. 3.
Mexico Limited Warranty ® ViewSonic Projector What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components & accessories.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.