User Guide
44
Shutting down the projector
1. Press Power or Off and a confirmation
message is displayed prompting you.
If you don't respond in a few seconds, the
message will disappear.
2. Press Power or Off a second time.
3. Once the cooling process finishes, a "Power
Off Ring Tone" will be heard. Disconnect the
power cord from the wall socket if the
projector will not be used in an extended
period of time.
• To turn off the ring tone, see "Turning off the Power On/Off Ring Tone" on page 43 for
details.
• If you need to connect to the projector in standby mode, set Standby LAN control to On in
the ADVANCED > LAN Control Settings menu. Then use a WOL tool to activate the
standby network function.
CAUTION
• To protect the lamp, the projector will not respond to any commands during the cooling
process.
• Do not unplug the power cord before the projector shutdown sequence is complete.