SC-U25 Zero Client User Guide Model No.
Thank you for choosing ViewSonic With over 25 years as a world leading provider of visual solutions, ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
18. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 19. CAUTION – These servicing instructions are for use by qualified service personnel only. 20. For use only with UL Listed Wall Mount Bracket with minimum weight/load: 0.75kg. 21. Mounting kit distance ( 75 x 75 mm, 100 x 100 mm) and screw type, dimension.
Copyright Information Copyright © ViewSonic® Corporation, 2014. All rights reserved. ViewSonic, the three birds logo, and MultiClient are either registered trademarks or trademarks of ViewSonic Corporation. Microsoft®, Windows®, and MultiPoint are trademarks of the Microsoft group of companies. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.
Table of Contents Compliance Information i Copyright Information v 1. Package Contents 1 2. Exterior Views 3. Panel Components 4. Positioning Your SC-U25 5. What you need? 4 1 2 3 5.1 Host PC 5.2 SC-U25 Zero Clients 5.3 Networking 5.4 Software/OS 4 5.5 Setting UP 5.6 Host PC Installation 5.7 First Boot Configurations 5.
1. Package Contents Please check your package contents. Ensure that all of the items are present in your package(s). If any items are missing or damaged, please contact your dealer immediately. ViewSonic SC-U25 AC adaptor VESA mount plate Optical Disk Quick Start Guide Compliance Information brochure Zero Client 05/05/14 Thin Client_DVD Made in Taiwan 2.
3. Panel Components ViewSonic SC-U25 2 3 1 4 Front Panel Components No. 1 Component Sign Name Description 1 Power LED Indicates the status of power. 1 2 Microphone port Connects to a microphone or a digital musical instrument such as a MIDI keyboard. 3 Headphone port Connects to a set of headphones or a speaker system. 4 USB port Connects to a USB device. The meanings of LED signals are described in section “1.6 LED Indicators” on page 3.
4. Positioning Your SC-U25 You can simply position a Zero Client on a desk or a desired place. Or, you can mount a Zero Client on the back of a monitor using a VESA mount kit. Mounting your clients To mount your Zero Client (ViewSonic SC-U25), please follow the steps below: 1. With the rear panel of the Zero Client facing downward, secure the VESA mount bracket to the Zero Client with two (2) screws supplied. 2. Align the bracket holes with the VESA holes on the back of the monitor.
5. What you need? 5.1 Host PC • 1 Host PC (with monitor, keyboard and mouse) • We recommend buying one of our certified host PC (http://support.userful.com/wiki/index.php/Certified_Hardware/Host_PCs). • If you are unable to get certified model consider following supported specifications before buying one: CPU Intel Nehelam series – Intel® Core™ ix xxx (i.e. Intel® Core™ i7 920) Intel Sandy bridge – Intel® Core™ ix 2xxx (i.e. Intel® Core™ i7 2770) Intel Ivy bridge – Intel® Core™ ix 3xxx (i.e.
5.5 Setting UP To setup you need to prepare host PC and connect SC-U25 with host PC using a gigabit switch. Example1 Local Area Network ViewSonic SC-U25 Gigabit Switch Example2 Monitor ` Shift Ctrl F1 ! 1 F2 @ 2 Q F3 # 3 W A Alt ^ 6 T F C F5 % 5 R D X F4 $ 4 E S Z F6 F7 F8 F9 F12 Backspace = : ; > . F11 + { [ { [ P L < , F10 - O K M _ ) 0 I J N ( 9 8 U H B * & 7 Y G V - Esc ~ Tab Caps Lock \ " Print Screen Scroll Lock Insert Home Delete
5.6 Host PC Installation It is recommended to prepare (install) the host PC before setting up Ethernet stations. You need a monitor, keyboard and mouse to prepare your host PC.
Specifications Specifications ViewSonic SC-U25 Zero Client Processor Resolution I/O interfaces SMSC UFX600 Security Communication Power VESA Mount Plate Dimensions Environment 1 x Kensington lock slot 1920x1080 Front panel: USB 2.0 x 2, Microphone in, Headphone Rear panel: USB 2.0 x2, RJ45, DC IN, POWER SWITCH, VGA OUTPUT PORT 10/100/1000Mb Ethernet 5V DC, 2A, 10W 114 mm (W) x 60 mm (H) 6 mm (D) / 4.49 ” (W) x 2.36” (H) x 0.24” (D) 120 mm (W) x 26mm (H) x 80mm (D) / 4.72” (W) x 1.0” (H) x 3.
Troubleshooting Troubleshooting If you are having troubles in setting up this demo, please make sure: • You have a certified host PC model or one with supported specifications • To check “System Diagnostics” under Control Center and verify if host PC meets the minimum requirements • You have good Ethernet cables (Cat-5e) • Network SC-U25 are not directly connected to the host PC • The connection between the host PC and the main switch is gigabit capacity Technical information Product Documentat
Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region T= Telephone C = CHAT ONLINE Email Australia/New www.viewsonic.com.au Zealand AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty ViewSonic® Zero Client What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. 2.