SC-Z56 Zero Client User Guide Model No.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
18. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. 19. CAUTION – These servicing instructions are for use by qualified service personnel only. 20. For use only with UL Listed Wall Mount Bracket with minimum weight/load: 0.75kg. 21. Manufacturer and model of the power supplie, TPV Electronics(Fujian)Co.,Ltd ADPC1945. 22.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/ EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Copyright Information Copyright © ViewSonic Corporation, 2014. All rights reserved. ViewSonic, the three birds logo and MultiClient are either registered trademarks or trademarks of ViewSonic Corporation. Microsoft®, Windows®, and MultiPoint™ are trademarks of the Microsoft group of companies. Other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.
Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: SC-Z56 ViewSonic Zero Client VS15815 SC-Z56_UG_ENG Rev.
Table of Contents Compliance Information ........................................................................................................................ i Important Safety Instructions ............................................................................................................... ii Declaration of RoHS2 Compliance ........................................................................................................ iv Copyright Information ....................................
1 Overview This chapter provides an overview of your SC-Z56 zero clients. 1.1 Introduction Desktop virtualization and simple endpoint devices 2 1.2 Features Key features of ViewSonic SC-Z56 2 1.3 Package Contents Check your package contents 2 1.4 Exterior Views Overview of zero client outside elements 3 1.5 Panel Components Descriptions of front and rear panel components 3 1.
Overview Introduction 1.1 Introduction Desktop virtualization provides a new perspective to reconsider the design and implementation of an IT infrastructure. In a desktop virtualization infrastructure, a station is no longer a cumbersome desktop, but simply an endpoint device for users to access delivery services from the server(s).
Overview Exterior Views 1.4 Exterior Views ViewSonic SC-Z56 Left Front View Right Rear View Front 1.5 Rear Panel Components ViewSonic SC-Z56 1 2 3 4 5 Front Panel No. 1 Component Sign Name Power button Description • Press to power on the zero client. • Long press to force power off the zero client. • Connects to a USB device. 2 USB port • If using a USB web cam, it must be connected to one of the three front USB ports as indicated above.
Overview LED Indicators ViewSonic SC-Z56 6 7 8 9 10 11 Rear Panel No. Panel Component Sign Component Name Description 6 USB port Connects to a keyboard or mouse. 7 LAN port Connects to a network. 8 DP port 9 Audio out 10 DC IN 11 Kensington lock 1.6 Connects to an AC adapter. LED Indicators Your SC-Z56 is equipped with a Power LED to indicate the state of power. The meanings of LED signals are described as follows: LED Power LED Signal Meaning Amber The client is off.
2 Setting Up Your SC-Z56 This chapter provides detailed instructions on how to set up your SC-Z56 zero clients. 2.1 Positioning Your SC-Z56 To mount your SC-Z56 Step 1: Remove the Stand from Your SC-Z56 Step 2: Understand VESA Mount Plate for SC-Z56 Step 3: Mount Your SC-Z56 6 6 7 2.
Setting Up Your SC-Z56 Positioning Your SC-Z56 2.1 Positioning Your SC-Z56 There are two ways to position your SC-Z56: • Put it (with its stand) on a desk or a desired place uprightly. • Mount it on the back of a monitor using a VESA mount kit.
Setting Up Your SC-Z56 Positioning Your SC-Z56 Step 3: Mount Your SC-Z56 To mount your SC-Z56 on the back of a monitor, please do the following: 1. Attach the mounting bracket to the back side of SC-Z56 using the 2 screws provided. M4XL8*2 (Silver) 2. Next, use the provided screws (M4XL10) to attach the VESA mounting plate to the rear side of the monitor. 3.
Setting Up Your SC-Z56 Getting Connected 2.2 Getting Connected To make connections for your SC-Z56, please do the following: 1. Connect your SC-Z56 to your local network with an Ethernet cable. 2. Connect a keyboard and mouse to your SC-Z56. 3. Connect and turn on the monitor(s). NOTE • For your SC-Z56, use the DP cable to connect your SC-Z56 and monitor. • Please note that you need to connect and turn on your monitor(s) before powering up your zero client.
Specifications ViewSonic SC-Z56 zero client Processor Teradici TERA2140 Memory 512 MB Resolutions Single: 2560x1600@60Hz Dual: 2560x1600@60Hz Quad: 1920x1200@60Hz I/O interfaces Front: 4 x USB 2.0 Networking 1 x 10/100/1000Mb Ethernet Power DC Power In: DC 19V, 2.37A External Power Adapter: AC 100-240, 50/60Hz, 1.5A Supported Protocols VMware PCoIP Security 1 x Kensington lock slot Dimensions (W)37.1 x (H)206 x (D)137.7 mm Net Weight 1.85 lbs (0.
Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region Website T= Telephone C = CHAT ONLINE Email Australia/ New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty ViewSonic® Zero Client What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. 2.
