User Guide

ViewSonic, the three birds logo, OnView, ViewMatch, ViewMeter, and MultiClient are

either registered trademarks or trademarks of ViewSonic Corporation.

Microsoft

, Windows

, and MultiPoint™ are trademarks of the Microsoft group of

companies.

ENERGY STAR

is a registered trademark of the U.S. Environmental Protection

Agency (EPA). As an ENERGY STAR

partner, ViewSonic Corporation has

determined that this product meets the ENERGY STAR

guidelines for energy

efciency.

Other product names mentioned herein are used for identication purposes only and may

be trademarks and/or registered trademarks of their respective companies.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or

omissions contained herein; nor for incidental or consequential damages resulting from

furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the

right to change product specications without notice. Information in this document may

change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any

purpose without prior written permission from ViewSonic Corporation.

NOTE

• Display Sleep Mode. Within 5 minutes of user inactivity, the display will enter

the Display Sleep mode with a blank screen and reduced power consumption

by the factory default settings. The display returns to the Display Normal mode

upon sensing a request from a user such as moving the mouse or pressing a

key.

• To adjust settings for the Display Sleep mode, click Options > Conguration >

OSD to adjust the settings.

• System Sleep Mode. ViewSonic SC-Z55 doesn’t support the System/Client

Sleep mode.

NOTE

• The default power management settings have been selected for compliance

with ENERGY STAR that are recommended by the ENERGY STAR program for

optimal energy savings.