TD1655 Visning Användarguide Modellnr VS18170 P/N: TD1655
Tack för att du väljer ViewSonic® ViewSonic® är en världsledande leverantör av visuella lösningar som strävar efter att överträffa världens förväntningar på teknisk utveckling, innovation och enkelhet. På ViewSonic® tror vi att våra produkter har potential att få en positiv inverkan i världen, och vi är övertygade om att ViewSonic®-produkten du har valt kommer att tjäna dig väl.
Säkerhetsåtgärder Läs följande Säkerhetsåtgärder innan du börjar använda enheten. • Förvara denna användarguide på ett säkert ställe för framtida referens. • Läs alla varningar och följ alla instruktioner. • Sitt minst 45 cm (18 tum) på avstånd från enheten. • Tillåt ett fritt utrymme på minst 10 cm (4 tum) runt apparaten för att säkerställa en korrekt ventilation. • Placera enheten i ett välventilerat område. Placera inte något på enheten som förhindrar värmeavledning.
• Vid anslutning till ett eluttag, ta INTE ut jordningsspetsen. Se till att jordningsspetsar ALDRIG TAS BORT. • Skydda elsladden så att den inte blir trampad på eller klämd, särskilt vid kontakten och vid den punkt där den kommer ut från utrustningen. Se till att eluttaget finns nära utrustningen så att den är lättillgänglig. • Använd endast tillbehör som anges av tillverkaren. • När en vagn används, var försiktig när du flyttar vagnen/utrustningen för att undvika personkador från omkullvältning.
Innehåll Säkerhetsåtgärder........................................................ 3 Introduktion................................................................. 7 Paketets innehåll.....................................................................................................7 Produktöversikt.......................................................................................................8 Framifrån och vänster sida................................................................................
Bilaga......................................................................... 27 Specifikationer.......................................................................................................27 Ordlista..................................................................................................................29 Felsökning..............................................................................................................33 Underhåll...................................................
Introduktion Paketets innehåll • • • • • • • • • Bärbar pekskärm Strömadapter USB typ C-kabel USB typ C till typ A-kabel Mini HDMI till HDMI-kabel Skyddshölje Rengöringsduk Passiv penna Snabbstartsguide OBS! Nätadaptern och videokabeln som ingår i paketet kan variera beroende på ditt land. Kontakta din lokala återförsäljare för mer information.
Produktöversikt Framifrån och vänster sida Type C Type C HDMI Bakifrån och höger sida Stativ STRÖMINDIKATOR Joystickknapp I/O-portar Type C Type C HDMI 1 OBS! 1 USB typ C 2 Mini HDMI 2 3 3 Ljudutgång För mer information om knapparna Mellan (l)//// och deras funktioner kan du läsa ”Snabbtangenter” på sidan 18.
Första installation Installera höljet Använda höljet och stativet OBS! Placera alltid enheten på en plan, stabil yta. Underlåtenhet att göra detta kan leda till att enheten faller och skadar enheten och/eller orsakar personskada.
Göra anslutningar Anslutning till ström Skärmen kan strömförsörjas med en av följande konfigurationer: • Typ C-anslutning (Effekten måste vara större än 10 W) • Typ A-anslutning (Effekten måste vara större än 10 W) • Strömadapter 100-240 Vac 50/60 Hz OBS! Mer information finns i ”Strömförsörjning” på sidan 13.
Ansluta externa enheter och pekanslutning Dina externa enheter kan anslutas i en av följande konfigurationer: • Typ C-anslutning Anslut en typ C-kabel från din externa enhet till en typ C-port på skärmen. eller (Effekten måste vara större än 10 W) • Mini HDMI-anslutning 1. Anslut mini HDMI-kabeln från din externa enhet till mini HDMI-porten på skärmen. 2. nslut USB typ A till typ C-kabeln från din externa enhet till skärmen för att aktivera pekkontroller.
Pekfunktionskontroll Observera när du använder pekfunktionen: • Pekfunktionen kan behöva cirka fem (5) sekunder för att återuppta om USB-kabeln kopplas bort och ansluts igen eller om datorn återupptas från Sleep Mode (Viloläge). • Pekskärmen kan bara upptäcka upp till tio (10) fingrar samtidigt. • Om Windows-markören inte följer fingret när du pekar på skärmen ska du göra följande: 1.
Strömförsörjning Strömförsörja en bärbar dator eller mobiltelefon Om den medföljande nätadaptern är ansluten till skärmen kan skärmen ladda en ansluten bärbar dator eller mobiltelefon. OBS! Strömförsörjningseffekt: DC 5V/9V/12V/15V/20V/max 3A. 100-240 Vac 50/60 Hz Upptäckt av strömförsörjning Denna produkt kommer att upptäcka om strömförsörjningsenheten är en adapter, bärbar dator eller mobiltelefon. • Om strömkällan är en adapter eller bärbar dator är ljusstrykans standardvärde 100.
Strömförsörjning - Ytterligare information På grund av TD1655:s design bör du tänka på: • Den första anslutna enheten kommer att vara huvudingångssignalen. • När en typ C-port känner igen en extern enhet som en nätadapter kommer den bara att distribuera strömmen. Det kommer INTE att visa insignalen. • Endast när en av typ C-portarna känns igen som en strömadapter kan den andra leverera tvåvägsström.
Använda skärmen Justera visningsvinkeln Justering av lutningsvinkeln Luta skärmen bakåt till önskad visningsvinkel via det medföljande stativet (20˚ till 60˚). eC Typ eC Typ I HDM OBS! Håll skärmen stilla med en hand medan du lutar stativet framåt eller bakåt med den andra handen.
Slår på/stänga av enheten 1. Anslut till en strömkälla i en av de tillgängliga konfigurationerna. Mer information finns i sidan 10. 2. Tryck på Mellan (l)-knappen för att slå på bildskärmen. 3. För att stänga av skärmen, tryck på Mellan (l)-knappen igen. OBS! Skärmen förbrukar fortfarande lite ström så länge nätkabeln är ansluten till vägguttaget. Om skärmen inte används under en längre tid, koppla ur strömkontakten från vägguttaget.
Snabbmeny Tryck på ///-knappen för att aktivera snabbmenyn. ViewMode Contrast/Brightness Input Select Main Menu Exit OBS! Följ knappguiden som visas på skärmen för att välja alternativ eller göra justeringar. Meny ViewMode (Visningsläge) Beskrivning Välj en av de förinställda färginställningarna. Contrast/Brightness (Kontrast/ Justera kontrasten eller ljusstyrkan. Ljusstyrka) Input Select (Val av ingång) Välj ingångskälla. Main Menu (Huvudmeny) Öppna skärmmenyn (OSD).
Snabbtangenter När skärmmenyn (OSD) är av kan du snabbt komma åt specialfunktionerna med hjälp av knapparna på kontrollpanelen. Tangent t Beskrivning Tryck och håll nere tangenten för att låsa/låsa upp OSD-menyn. När menyn visas på skärmen fortsätter du att hålla nere knappen i 5 sekunder för att låsa/låsa upp OSD-menyn.
Tangent u Beskrivning Tryck och håll nere tangenten för att låsa/låsa upp Ström-knappen. När menyn visas på skärmen fortsätt att hålla nere knappen i 5 sekunder för att låsa/låsa upp Ström-knappen. Power Lock/Unlock Locking Power Button 3 Press and hold for 10s to lock power Om Ström-knappen är låst visas meddelandet nedan på skärmen: Power Lock/Unlock Power Button Locked p Tryck och håll nere knappen i 5 sekunder för att visa/dölja omstartsskärmen när enheten är påslagen.
Tangent q Beskrivning Tryck och håll nere tangenten i 5 sekunder för att slå på DDC/CI och DDC/2B.
Konfigurera inställningarna Allmänna funktioner 1. Tryck på Mellan (l)-knappen för att visa skärmmenyn (OSD). Input Select Audio Adjust ViewMode Color Adjust Manual Image Adjust Setup Menu Type C HDMI 1920 x 1080 @ 60Hz 75% 2. Tryck på knappen eller för att välja huvudmenyn. Tryck sedan på Mellan (l)-knappen för att öppna vald meny.
3. Tryck på knappen eller för att välja önskat menyalternativ. Tryck sedan på Mellan (l)-knappen för att öppna undermenyn. Input Select Audio Adjust ViewMode Color Adjust Contrast/Brightness sRGB Color Temperature Bluish Color Space Cool Color Range Native Manual Image Adjust Setup Menu Warm User Color 1920 x 1080 @ 60Hz 75% 4. Tryck på knappen eller för att välja inställning. Tryck sedan på Mellan (l)knappen för att bekräfta.
Menyträd för skärmmenyn (OSD) Huvudmeny Undermeny Menyalternativ Type C (Typ C) Input Select (Val av ingång) HDMI Audio Adjust Volume (Volym) (Ljudjustering) Mute (Ljud av) ViewMode (Visningsläge) (-/+, 0~100) On (På) Off (Av) Off (Av) Office (Kontor) Web (Webb) Text Movie (Film) MAC Mono FPS 1 FPS 2 Game (Spel) RTS MOBA Color Adjust Contrast/Brightness Contrast (Kontrast) (Färgjustering) (Kontrast/Ljusstyrka) Brightness (Ljusstyrka) Color Temperature sRGB (Färgtemperatur) Bluish (Blåaktig) Cool (S
Huvudmeny Undermeny Menyalternativ Manual Image Adjust (Manuell bildjustering) Sharpness (Skärpa) Dynamic Contrast (Dynamisk kontrast) (-/+, 0/25/50/75/100) (-/+, 0/25/50/75/100) Response Time (Responstid) Aspect Ratio (Bildförhållande) Overscan (Överskanning) Low Input Lag (Låg inmatningsfördröjning) Blue Light Filter (Blåljusfilter) Standard Advanced (Avancerat) Ultra Fast (Ultrasnabb) 4:3 Full Screen (Fullskärm) On (På) Off (Av) On (På) Off (Av) (-/+, 0~100) 24
Huvudmeny Undermeny Menyalternativ Setup Menu (Inställningsmeny) Language Select (Språkval) English Français Deutsch Español Italiano Suomi Svenska Русский Türkçe Česká 日本語 한국어 繁體中文 Resolution Notice (Upplösningsmeddelande) Information OSD Time Out (OSD avbrott) OSD Background (OSD-bakgrund) OSD Pivot (OSD-vridning) Power Indicator (Strömindikator) Boot Up Screen (Starta upp skärmen) Auto Power Off (Auto.
Huvudmeny Undermeny Menyalternativ Setup Menu (Inställningsmeny) Sleep (Strömsparläge) 30 Minutes (30 minuter) 45 Minutes (45 minuter) 60 Minutes (60 minuter) 120 Minutes (120 minuter) Off (Av) Standard Optimize (Optimera) Conserve (Bevara) On (På) Off (Av) On (På) Off (Av) ECO Mode (Ekonomiläge) DDC/CI Auto Detect (Automatisk identifiering) Memory recall (Minnesåterhämtning) 26
Bilaga Specifikationer Objekt Kategori Specifikationer LCD Typ TFT aktiv matris 1920 x 1080 LCD; 0,1792 (H) mm x 0,1792 (V) mm pixel pitch 39,6 cm, 16” (15,6” synliga) RGB vertikal rand Antifingeravtryck, 6H hård beläggning TMDS digital (100 Ω) HDMI (v 1.
Objekt Driftsförhållanden Förvaringsförhållanden Mått Vikt Energisparlägen Kategori Specifikationer Temperatur Fuktighet Höjd över havet Temperatur Fuktighet Höjd över havet Fysisk (B x H x D) 0° C till 40° C (32° F till 104° F) 20 % till 90 % (icke-kondenserande) 9 842,5 fot (3 km) -20° C till 60° C (-4° F till 140° F) 5% till 90 % (icke-kondenserande) 40 000 fot (12,1 km) 355,5 x 223,4 x 14,7 mm (14,5” x 8,79” x 0,58”) 0,94 kg (2,07 lbs) 7W (vanlig) < 0,3W Fysisk På3 Av 1 Ställ inte in datorns graf
Ordlista Det här avsnittet beskriver standardordlistan för benämningar som används i alla LCD-skärmmodeller. Alla benämningar anges i alfabetisk ordning. OBS! Vissa benämningar kanske inte är tillämpliga på din skärm. A Advanced DCR (Avancerad DCR) Avancerad DCR-teknik identifierar automatiskt bildsignalen och styr bakgrundsbelysningen och färgen på ett intelligent sätt för att förbättra förmågan att göra det svarta svartare i en mörk scen och göra det vita vitare i en ljus miljö.
C Color Adjust (Färgjustering) Med flera färgjusteringslägen för att justera färginställningarna så att de passar användarens behov. Color space (Färgrymd) Gör att användare kan välja vilken färgrymd de vill använda för skärmsfärgutskrifter (RGB, YUV). Color Temperature (Färgtemperatur) Låter användare välja specifika inställningar för färgtemperatur för att ytterligare anpassa deras tittarupplevelse.
M Manual Image Adjust (Manuell bildjustering) Visar menyn ”Manuell bildjustering”. Du kan ställa in manuellt en mängd olika bildkvalitetsjusteringar. Memory recall (Minnesåterhämtning) Återställer justeringarna till fabriksinställningarna om skärmen används i ett fabriksinställt tidsläge som anges i ”Specifikationer” i denna handbok. OBS! • (Undantag) Denna kontroll påverkar inte ändringar som gjorts i inställningen ”Språkval” eller ”Strömlås”.
R Recall (Återkalla) Återställer ViewMode-skärmsinställningar. Resolution Notice (Upplösningsmeddelande) Meddelandet talar om för användarna att den aktuella upplösningen inte är den rätta ursprungliga upplösningen. Detta meddelande kommer att visas i skärmsinställningsfönstret när du ställer in skärmupplösningen. Response Time (Responstid) Justerar svarstiden, skapar jämna bilder utan strimmor, oskärpa eller spökbilder.
Felsökning Det här avsnittet beskriver några vanliga problem som du kan uppleva när du använder skärmen. Problem Möjliga lösningar Ingen ström • Se till att du har slagit på skärmen genom att trycka på Ström-knappen. • Kontrollera att nätsladden är korrekt och säkert ansluten till skärmen och nätuttaget. • Anslut en annan elektrisk enhet till vägguttaget för att kontrollera att uttaget levererar ström.
Problem Möjliga lösningar OSD-menyn visas inte på skärmen/ OSD-kontrollerna är otillgängliga • Kontrollera om OSD-menyn är låst. Om ja, tryck ner och håll intryckta knapparna 3 och 5 i 10 sekunder. • Stäng av skärmen, koppla ur nätsladden, sätt tillbaka den och slå på skärmen. • Återställ skärmen till fabriksinställningarna. Kontrollpanelens tangenter fungerar inte • Tryck på en knapp i taget. • Starta om datorn. Vissa menyer kan inte väljas i OSD-menyn • Justera ViewMode eller ingångskällan.
Underhåll Allmänna försiktighetsåtgärder • Se till att skärmen är avstängd och att strömkabeln är urkopplad från vägguttaget. • Spruta aldrig eller häll någon vätska direkt på skärmen eller höljet. • Hantera skärmen försiktgt eftersom en mörkare skärm, om den repas, kan reporna synas tydligare än med en ljusare skärm. Rengöra skärmen • Torka av skärmen med en ren, mjuk, luddfri trasa. Detta tar bort damm och andra partiklar.
Information om regler och service Information om överensstämmelse Detta avsnitt behandlar alla gällande krav och uttalanden om regler. Bekräftade motsvarande ansökningar ska hänvisa till märkskyltar och relevanta märkningar på enheten. Uttalande gällande FCC-efterlevnad Denna enhet överensstämmer med avsnitt 15 i FCC-reglerna.
Följande information gäller endast för EU-medlemsstater: Det märke som visas till höger är i enlighet med avfall från elektrisk och elektronisk utrustning Direktiv 2012/19/EU (WEEE). Märket anger skyldigheten att INTE kassera utrustningen som osorterat kommunalt avfall, utan istället använda de system för återlämnande och insamling enligt lokal lag.
• Bly i lödmetaller med hög smälttemperatur (dvs blybaserade legeringar innehållande 85 viktprocent eller mer bly). • Elektriska och elektroniska komponenter som innehåller bly i ett glas eller keramik annat än dielektrisk keramik i kondensatorer, t.ex. piezoelektroniska anordningar, eller i en glas- eller keramisk matrisförening. Indisk begränsning av farliga ämnen Begränsning av farliga ämnen (Indien).
Information om upphovsrätt Copyright© ViewSonic® Corporation, 2020. Alla rättigheter förbehållna. Macintosh och Power Macintosh är registrerade varumärken som tillhör Apple Inc. Microsoft, Windows och Windows-logotypen är registrerade varumärken som tillhör Microsoft Corporation i USA och andra länder. ViewSonic®, tre fåglar-logotypen, OnView, ViewMatch, och ViewMeter är registrerade varumärken som tillhör ViewSonic® Corporation.
Kundservice För teknisk support eller produktservice, se tabellen nedan eller kontakta din återförsäljare. OBS! Du behöver produktens serienummer. Land/region Webbplats Land/region Webbplats Asien och Stillahavsområdet samt Afrika Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ 中国 (China) www.viewsonic.com.cn 香港 (繁體中文) www.viewsonic.com/hk/ Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/ Indonesia www.viewsonic.com/id/ Israel www.viewsonic.
Begränsad garanti ViewSonic® bildskärm Vad garantin omfattar: ViewSonic® garanterar att produkterna är fria från brister i material och utförande under garantiperioden. Om en produkt visar sig vara defekt i material eller utförande under garantiperioden, kommer ViewSonic® till sitt eget alternativ och som enda åtgärd att reparera eller ersätta produkten med en liknande produkt. Ersättningsprodukt eller delar kan innehålla omarbetade eller renoverade delar eller komponenter.
• Användning av tillbehör eller delar som inte uppfyller ViewSonics specifikationer. • Ägarens underlåtenhet att utföra regelbunden produktunderhåll enligt användarhandboken. • Annan orsak som inte är relaterad till en produktfel. • Skador som orsakas av statiska (icke-rörliga) bilder som visas under långa tidsperioder (även kallad inbränd bild). • Programvara - Alla program från tredje part som ingår i produkten eller installeras av kunden.
Uteslutning av skadestånd: ViewSonics ansvar är begränsat till kostnaden för reparation eller utbyte av produkten. ViewSonic® är inte ansvarigt för: • Skada på annan egendom som orsakats av eventuella brister i produkten, skador på grund av olägenheter, förlust av användningen av produkten, förlust av tid, förlust av vinst, förlust av affärsmöjligheter, förlust av goodwill, störning av affärsrelationer eller annan kommersiell förlust, även om meddelats om möjligheten för sådana skador.
Process Color C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Spot Color Pantone Black C Spot Color Pantone 187 C