VC10 WLAN-Präsentations-Gateway Bedienungsanleitung Modellnummer: VS17129
Vielen Dank, dass Sie sich für ViewSonic entschieden haben Mit mehr als 30 Jahren als weltweit führender Anbieter visueller Lösungen verfolgt ViewSonic das Ziel, die Erwartungen der Welt an Technologieentwicklung, Innovation und Einfachheit zu übertreffen. Wir bei ViewSonic glauben, dass unsere Produkte das Potenzial besitzen, einen positiven Einfluss auf die Welt zu haben; und wir sind uns sicher, dass Ihnen das von Ihnen gewählte ViewSonic-Produkt gute Dienste leisten wird.
Übereinstimmungserklärung Bitte lesen, bevor Sie fortfahren • Verwenden Sie nur die Batterien und das Netzteil, die vom Hersteller bereitgestellt wurden. Der Einsatz nicht autorisierter Zubehörartikel kann Ihre Garantie erlöschen lassen. • Bewahren Sie Ihr Gerät nicht bei Temperaturen von mehr als 50 °C auf. • Die Betriebstemperatur für dieses Gerät beträgt 0 °C bis 35 °C. FCC-Erklärung Die folgende Erklärung gilt für alle Produkte, die eine FCC-Zulassung erhalten haben.
FCC SAR-Hinweis Diese Ausrüstung erfüllt die FCC-Hochfrequenzbelastungsgrenzwerte, die für ein unbeaufsichtigtes Umfeld festgelegt wurden. Der Endanwender muss bestimmte Bedienungsanweisungen einhalten, um die Vorschriften zur HF-Aussetzung zu erfüllen. Dieser Sender darf nicht gemeinsam mit jeglichen anderen Antennen oder Sendern installiert oder betrieben werden.
IC-Erklärung Dieses Gerät stimmt mit dem/den lizenzfreien RSS-Standard(s) von Industry Canada überein. Der Betrieb unterliegt den folgenden beiden Voraussetzungen: (1) Dieses Gerät darf keine Störungen verursachen, und 2) dieses Gerät muss jegliche empfangenen Störungen hinnehmen, einschließlich Störungen, die zu unbeabsichtigtem Betrieb führen können. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
RoHS2-Konformitätserklärung Dieses Produkt wurde gemäß den Anforderungen der EG-Richtlinie 2011/65/EU zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in Elektro- und Elektronikgeräten (RoHS2-Richtlinie) entworfen und hergestellt und hat sich als mit den maximalen Konzentrationswerten, die der europäischen Ausschuss für die technische Anpassung (Technical Adaptation Committee; TAC) festgelegt hat, wie folgt konform erwiesen: Substanz Vorgeschlagene maximale Konzentration Tatsächliche Konzent
Inhalt Übereinstimmungserklärung FCC-Erklärung.........................................................................................................i CE-Konformität für europäische Länder.................................................................ii IC-Erklärung.......................................................................................................... iii RoHS2-Konformitätserklärung..............................................................................
Cloud-Speicher.........................................................................................................................10 Kommentar...............................................................................................................................11 Geteilte Anzeige und Hoststeuerung........................................................................................11 Präferenzen...................................................................................................
Copyright Informationen Copyright © ViewSonic® Corporation, 2017. Alle Rechte vorbehalten. ViewSonic und das Logo mit den drei Vögeln sind eingetragene Marken der ViewSonic Corporation. VESA ist eine eingetragene Marke der Video Electronics Standards Association. DPMS, DisplayPort und DDC sind Marken der VESA. ENERGY STAR® ist eine eingetragene Marke der U.S. Environmental Protection Agency (EPA).
Allgemein „EZCast Pro“ ist ein neues Produkt, das auf der erfolgreichen WLAN-App EZCast basiert und einige neue Funktionen für Einsätze im kommerziellen und Bildungsbereich ergänzt. Es unterstützt Mehrfachnutzeranzeige in unserem neuen Hostkontrollsystem sowie eine Inhaltsbroadcasting-Funktion.
Installation der App zz IOS- und Android-Benutzer: Bitte suchen Sie im Apple App Store oder in Google Play nach „EZCast Pro“ und installieren Sie die App. Oder benutzen Sie die QR-Scanner-App, um den QR-Code auf der Hauptseite von EZCast LAN zu scannen. * Unterstützt iOS9 und Android 4.2 und höher zz Windows- und Mac OS-Benutzer: Bitte laden Sie die App von unserer offiziellen Website herunter: www.iezcast. com oder www.iezvu.com * Unterstützt Windows 7/8.1/10 und Mac OS 10.10 und höher.
App starten (die nachstehenden Abbildungen basieren auf iOS) zz Wenn Sie die App ausführen, können Sie nur einige Funktionen im Offline-Modus verwenden, falls Sie nicht mit dem EZCast Pro verbunden sind. zz Klicken Sie auf das „EZCastPro“-Symbol, das Gerät wird aufgelistet und Sie können das gewünschte Gerät zur Übertragung wählen (falls mehrere Geräte aufgelistet sind).
Wichtig: Erklärung zum WLAN-Verbindungsmodus zz EZCast Pro-Geräte ermöglichen verschiedene Verbindungsmethoden, die nachfolgend beschrieben sind: zz SoftAP-Modus: Es handelt sich um eine Direktverbindung zwischen PC/ Mobiltelefon/Tablet zu einem Pro-Gerät. Sie können sich für die Erkennung direkt mit der SSID von EZCast Pro verbinden. Außerdem können Sie die WLAN-Funktion von Pro-Geräten für eine Verbindung mit Ihrem Router konfigurieren, um weiter im Internet zu surfen.
zz Es gibt zwei spezielle Modi für WLAN-Verbindungen in unseren erweiterten Einstellungen. Einer ist „Nur direkte Verbindung“, der andere ist „Nur über Router“. zz Im Modus „Nur direkte Verbindung“ können Sie EZCast Pro nicht durch Ihren Heimrouter erkennen. Im Modus „Nur über Router“ deaktiviert das Pro-Gerät den SoftAP-Modus (SSID). In diesem Modus wird die SSID ausgeschaltet, damit niemand direkt danach suchen kann und Hackerangriffe verhindert werden.
Tipps zur App Anzeige des Verbindungsmodus Direktverbindung (Peer-to-Peer) Verbindung über Router Hauptfunktionen zz Sie können Ihre Multimedia-Daten nun drahtlos übertragen, bitte beachten Sie jedoch, dass für einige Funktionen wie Cloud-Video oder Internet eine Internetverbindung erforderlich ist.
Funktionen und Merkmale der App (*basierend auf der iOS-App) zz Foto Vor Benutzung der Fotofunktion müssen Sie EZCast Pro die gemeinsame Nutzung Ihrer Kamerarolle erlauben und den Standortdienst aktivieren. Im Fotobetrachter können Sie Fotos wählen und an Ihrem Fernseher/Projektor anzeigen lassen. Zudem können Sie die Gestensteuerung zum Vergrößern/ Verkleinern oder Blättern durch die Fotos nutzen.
zz Video Es gibt 2 Quellen zum Videostreaming. Eine dient der Synchronisierung des gewünschten Videos über iTunes (iTunes-Dateisynchronisierung); oder wählen Sie das Video aus Ihren aufgenommenen Videos (Kamerarolle). Bitte beachten Sie, dass iOS das aufgenommene Video zum Einsparen von Bandbreite vor dem Streamen komprimiert; Sie können entscheiden, ob es zur künftigen Benutzung in der EZCast Pro-App gespeichert werden soll. Zudem können Sie eine Untertiteldatei mit EZCast Pro synchronisieren.
zz Echtzeitkamera Die Echtzeitkamera ist eine reale Objektkamera, mit der Sie das Bild von der Kamera Ihres Mobilgerätes streamen und Fotos zur Bearbeitung aufnehmen können. Sie können die Bildqualität anpassen und zwischen front- und rückseitiger Kamera umschalten. Sie können Sketch (Skizzieren) aktivieren und das aktuelle Bild im Album speichern. zz Dokument Der Dokumentenbetrachter unterstützt MS Office, PDF und Apples iWorks.
zz Web EZCast Pro verfügt über einen integrierten Browser; zudem kategorisieren wir verschiedene beliebte Webseiten für Sie. Die Webseite ändert sich dynamisch entsprechend des Landeseinstellung Ihres Gerätes. Darüber hinaus wird eine Funktion zum Skizzieren unterstützt. zz Cloud-Speicher Wir verbinden Sie mit Ihrem persönlichen Dropbox- und *Google Drive-Konto, damit Sie überall auf Ihren Cloud-Speicher zugreifen können. Alle Inhalte werden zum Herunterladen und Anzeigen dargestellt.
zz Kommentar Wir schätzen sowohl Ihr positives als auch Ihr negatives Feedback, daher haben wir eine innovative Möglichkeit für die Kommunikation mit Ihnen erstellt. Sie können uns Kommentare, Vorschläge oder auch Fehler direkt senden. Alle Rückmeldungen tragen dazu bei, unser Produkt zu verbessern.
Wenn Sie sich als erster Nutzer mit dem EZCast Pro verbinden und die App öffnen, werden Sie zum „Host“. Der Host ist zur Anzeigesteuerung berechtigt; das bedeutet, dass der Host alle Funktionen uneingeschränkt nutzen kann. Der nächste bzw. spätere Nutzer werden als „Gast“ behandelt; im Gastmodus sind einige Funktionen deaktiviert und es wird zur Anzeige die Berechtigung des Hosts benötigt.
zz Präferenzen Mit der Einstellung Except Preferred device (Mit Ausnahme des bevorzugten Gerätes) können Sie Anfragen von Gästen ebenfalls aktivieren/deaktivieren oder alle Anzeigeanfragen von Gästen ohne Anzeige einer Meldung automatisch erlauben. zz AirView Sie können die AirView-Funktion zur Betrachtung des aktuellen Anzeigeinhaltes an der EZCast Pro-Hardware aktivieren; dies ist ein großartiges Werkzeug zur Anzeigefreigabe. Diese Funktion erfordert zur Aktivierung keine Berechtigung vom Host.
zz EZBoard EZBoard ist eine innovative Funktion für echte Zusammenarbeit aller Benutzer im selben Board. Unterstützt werden Skizzen sowie das Einfügen von Fotos oder Text. Alle Benutzer sehen das Ergebnis in Echtzeit auf Pro oder ihren eigenen Geräten. Darüber hinaus ist ein Tool für Fragezwecke integriert. * Bitte beachten Sie, dass EZBoard eine Internetverbindung benötigt.
zz EZChannel Wenn Sie EZChannel aufrufen, können Sie den vorgegebenen Standardkanal, den öffentlichen Kanal oder den Kanal eines Freundes genießen. Bitte beachten Sie, dass Sie sich für einige Funktionen anmelden müssen. Hier können Sie Ihren Kanal abonnieren, Ihre Wiedergabelisten (Sammlungen) ansehen oder in den Einstellungen das Chrome-Plug-in installieren. * Bitte beachten Sie, dass diese Funktion eine Internetverbindung benötigt.
zz EZMirror (Miracast, nur für Windows und Android verfügbar) EZMirror ist mit Miracast voll kompatibel; Sie können die Schaltfläche EZMirror in der EZCast-App antippen und der Empfänger wechselt in den Miracast-Modus. Nach dem Einschalten erfolgt ein 60-sekündiger Countdown zur Verbindung Ihres Mobilgerätes mit dem Empfänger. Bitte wählen Sie Ihre Miracast-Funktion auf der Einstellungsseite an Ihrem Mobiltelefon.
zz AirSetup In der Einstellungsfunktion können Sie EZCastPro-Gerätekonfigurationen einrichten, einschließlich Ausgangsauflösung, Ändern des SSID-Kennworts, Einrichten der Router-Verbindung für Internetzugang, Sprachen, EZAir-Modi sowie Ein- und Ausschalten von Airview/Castcode/Miracode usw. Miracode: Hierbei handelt es sich um einen speziellen Code für die IP-Übersetzung für einen besseren IP-Schutz. Castcode: Abgesehen von der Hoststeuerung kann der Administrator den Castcode für Gäste einschalten.
zz Erweitert Beispiel: Nicht-Administrator-Modus (Gast/Host) Beispiel: Administratormodus Diese Funktion umfasst alle erweiterten Einstellungen wie Konferenzsteuerung, Geräte-Management, Netzwerkeinrichtung, Admin-Konfiguration, HostBerechtigungen, Zertifizierungsstelle hinzufügen und Zugriffssteuerung oder Neustart und FW aktualisieren … usw. Das Standardkennwort ist „000000“, und Sie müssen es bei der ersten Anmeldung als Administrator ändern.
Konferenzsteuerung (Standard nur für Host/Admin) Hierbei handelt es sich um eine erweiterte Steuerung für alle verbundenen Geräte, deren Position Sie auswählen und platzieren können. Sie können auch alle Geräte gleichzeitig trennen. Bitte beachten Sie, dass manche spezielle Modi wie Miracast davon nicht gesteuert werden.
Geräte-Management (Standard nur für Host/Admin) Hier können Sie Geräte-Einstellungen ändern, einschließlich Sprache, Hostname des Geräts (nicht die SSID), Auflösung, EZAir-Modus bei der Wiedergabe von Videos (nur Spiegeln oder Streamen von Videos), Ein-/Ausschalten der AirDisk-AutoWiedergabe, HDMI-CEC, AirView ein/aus, Castcode ein/aus/feste Stellen, Miracode ein/aus sowie max. Benutzerverbindungen.
Netzwerkeinrichtung (Standard für Admin, kann aber vom Administrator für den Host aktiviert werden) Hier können Sie netzwerkbezogene Einstellungen ändern. Bitte beachten Sie, dass für manche Einstellungen ein Neustart erforderlich ist.
Admin-Konfiguration (nur für Admin) Hier können Sie detailliertere Funktionen einstellen und Berechtigungen für den Host zum Steuern des Geräts freigeben. Außerdem finden Sie hier wichtige Funktionsbeschreibungen. Kennwort Ändern des Admin-Kennworts. Das Standard-Kennwort ist „000000“. Sie müssen es bei der ersten Anmeldung als Administrator ändern. *Bitte achten Sie gut auf die Sicherheit des Administrator-Kennworts.
Host-Berechtigungen Der Administrator kann für den Host einige Funktionen freischalten, damit auch der Host einige Steuerungsmöglichkeiten hat. Werden Funktionen für den Host freigeschaltet, kann der Host die Funktionen verwenden, ohne sich als Administrator anzumelden. Zugriffssteuerung Der Administrator kann entscheiden, ob verbundene Geräte über EZCast Pro auf das Internet zugreifen dürfen oder nicht.
Zertifizierungsstelle für WiFi Enterprise hinzufügen (802.1x). Für die WiFi Enterprise-Verbindung. Für die Zertifizierungsstelle wenden Sie sich bei Bedarf an Ihren MIS. Neustart-Steuerung (Standard nur für Admin, kann aber vom Administrator für den Host freigeschaltet werden) Bei Bedarf können Sie das Gerät neu starten. Auf Standard rücksetzen Alle Parameter werden auf die Standardeinstellungen zurückgesetzt. Info Zeigt Informationen über das Gerät, unter anderem die Version.
Weitere Informationen Kundendienst Für technische Unterstützung oder Kundendienst für Ihr Gerät sehen Sie bitte in der unten stehenden Tabelle nach, oder wenden Sie sich an Ihren Händler. HINWEIS: Sie benötigen die Seriennummer Ihres Geräts. Land/Region Website Telefone E-mail Deutschland www.viewsoniceurope. com/de/ www.viewsoniceurope.com/de/ support/call-desk/ service_deu@ viewsoniceurope.com Österreich www.viewsoniceurope. com/de/ www.viewsoniceurope.
Eingeschränkte Garantie ViewSonic® WLAN-Präsentations-Gateway Garantieumfang: ViewSonic gewährleistet, dass die Produkte während des Garantiezeitraums frei von Materialund Herstellungsfehlern sind. Wenn ein Produkt während des Garantiezeitraums Material- oder Herstellungsfehler aufweist, wird ViewSonic nach eigenem Ermessen das Produkt entweder reparieren oder durch ein vergleichbares Produkt ersetzen. Ersatzprodukte oder -teile können reparierte oder überholte Teile und Komponenten enthalten.
Einschränkung stillschweigender Garantien: Abgesehen von den in dieser Dokumentation aufgeführten Gewährleistungsansprüchen werden alle weiteren impliziten oder expliziten Garantieansprüche, einschliesslich der impliziten Garantie der Marktgängigkeit und der eignung für einen bestimmten Zweck, ausgeschlossen. Ausschluss von Schadensersatzansprüchen: Die Haftung von viewsonic ist auf die Kosten für die Reparatur oder den Ersatz des Produkts beschränkt. Viewsonic übernimmt keine Haftung für: 1.