Service manual

Step 6: Download program finish

Pressing the OK Button to finish the download program procedure.

Trouble shooting:

If you find the status like the follow picture. Please check the following item.

a. The connecting status between PC and ISP board.

b. The connecting status between ISP status and Monitor.

Turn off the power of monitor (AC plug off ) and disconnect the D-Sub connector .

To connect the D-Sub connector and then turn on the power of monitor.(AC plug on)

If the test result shows “passed,” it means the connection is well. If not (failed), it means

the connection has problems.Then you need to check the setup procedure or reboot the PC,

or simply use another PC to do the firmware upgrade.

ViewSonic Corporation Confidential - Do Not Copy VA902-3_VA902b-3