VFA720w-10 Digital Photo Frame User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright© ViewSonic Corporation, 2011. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Important Safety Instructions Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture, do not remove the cover, there are no spare parts inside, refer all product services to professional personnel. • Digital Photo frame is for indoor use only. • Unplug Digital Photo frame before performing care and maintenance.
Identify the Parts / Short press: Power On. Pause or Play. Move the selection Up. Press and hold 1 second: Enter. Press and hold 3 seconds: Power Off. 1. 2. 3. 4. 5. 6. 7. 8. Move the selection Left, display the Previous photo. Move the selection Right, display the Next photo. Short press: Move the selection Down, Exit slideshow. Press and hold 2 seconds: Show or close the OSD Menu Mode. OSD Menu Mode will close automatically after 10 seconds of menu inactivity.
3. Plug the AC Power Adapter into the Digital Photo Frame and into a wall outlet. 4. Press the on the back of the Digital Photo frame to power ON. The Digital Photo frame will automatically start a slide show of the photos on the memory card. 5. To display photos individually, press the button to open the Thumbnails Screen. Use the / / / to choose a Photo. Press and hold 1 second on the back of the Digital Photo Frame for full screen and start a slide show. to pause or restart the Slide Show. 6.
Technical Specification Product 17.8cm/7.0” LCD Screen Digital Photo Frame Resolution 480 x 234 pixels Memory Card Format SD, SDHC, MMC, MS (max:32GB) File Format JPEG, BMP (Up to 18 million pixel) Feature Slideshow mode Multiple transitional Style for Slideshow Variable Speed for Slide Show USB Port USB 2.
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site Australia/New Zealand www.viewsonic.com.au T=Telephone F=Fax AUS=1800 880 818 NZ=0800 008 822 E-mail service@au.viewsonic.com T (Toll-Free)= 1-866-463-4775 Canada www.viewsonic.com T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Mexico Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col.
12
