VFD621w Digital Photo Frame User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http:// www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Compliance Information CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE).
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.1% Mercury (Hg) 0.
Copyright Information Copyright © ViewSonic® Corporation, 2012. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
Important Safety Instructions Always follow the basic safety precautions below when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, and injury. Warning: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Warning: T o prevent the risk, do not remove the cover, there are no spare parts inside, refer all product services to professional personnel. • Digital Photo frame is for indoor use only.
P recautions Warnings Please read this manual carefully before using this product and save it for future reference. Avoid exposing this device to water, moisture or high temperature. Do not place it near swimming pool, bathtub or sink where it may come in contact with water. Clean only with a dry soft cloth. Do not use any chemical liquid for cleaning. To ensure reliable operation of the device and to protect it from overheating, do not block any ventilation openings. Only use accessories manufacturer.
Turn on/off and Menu Navigation 1) Turn on / off a. Connect the supplied power adapter to the photo frame and to an electrical outlet. The photo frame will power on automatically. b. Press and hold the button about 2 seconds to turn on. c. Press and hold the button about 2 seconds to turn off. d. Press the button to return to the previous screen. 2) Menu Navigation a. Press the button to toggle between the Main Menu and Clock Menu. b. Press the button to return to the Main Menu. c.
Import Electronic Business Cards Warning: Please backup all your photos first before attempting to restore Default Settings. All photos on the DPF will be erased. 1) Each electronic business card must be in 480 x 160 JPG file format. 2) You can design a stylish business card using Paint application. 3) Save the file name as “L0000.JPG” ~ “L0003.JPG”. 4) Create a folder name “BM”. 5) Copy all your electronic business card files into this “BM” folder. 6) Copy “BM” folder to SD card.
Calendar Press the button to toggle to the Clock Menu. Press [▲/▼] to adjust brightness, and press [◄/►] to change theme color, press [ ] to go into Calendar setting: 1) Mode : 24 Hour or 12 Hour. ] first, and then press[▲/▼]to adjust time, use the [◄/►] button 2) Time : press [ to move between fields, press [ ] button to enter. 3) Calibration : the number of second can be added or subtracted from a day (0, 0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, -4, -3.5, -3, -2.5, -2, -1.5, -1, -0.5).
Troubleshooting Problems Solutions Cannot power on, even when the device is connected to an electrical outlet. Check whether the AC power adapter rating is correct, and it is securely plugged to the device and to an electrical outlet. Screen is off or too dark. Check whether the screen brightness is set to a low level in the Setup menu. Screen freeze and does not respond to control anymore. Unplug the device and plug it again. Cannot playback pictures.
Customer Support For technical support or product service, see the table below or contact your reseller. Note : You will need the product serial number. Country/Region Web Site T=Telephone F=Fax E-mail Australia/New Zealand www.viewsonic.com.au AUS=1800 880 818 NZ=0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Mexico Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.873.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.