ViewSonic TM Digital Photo Frame VFM842/VFM1042 - User Guide - Guide de l’utilisateur - Guía del usuario IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Lead (Pb) Proposed Maximum Concentration Actual Concentration 0.1% < 0.1% Mercury (Hg) 0.1% < 0.
Copyright Information Copyright© ViewSonic Corporation, 2010. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
TABLE OF CONTENTS Introduction.............................................................................................................................................................................................1 Important Safety Precautions................................................................................................................................................................2 Main Features ......................................................................................
Introduction Thank you for purchasing this Digital Photo Frame. This Digital Photo Frame is compatible with SD, MMC and MS memory card formats, which enables you to view digital photo directly from your camera’s memory card. This manual contains important safety information and operation instructions, so please read all the instructions carefully before using the Digital Photo Frame and keeps it for future reference.
Important Safety Precautions Always follow these basic safety precautions when using your Digital Photo Frame. This will reduce the risk of fire, electric shock, product damage and personal injury. y Warning: Do not remove the cover or back to reduce the risk of electric shock. There are no user-serviceable parts inside. Refer servicing to qualified personnel. y Warning: Do not expose the Digital Photo Frame to rain or moisture to prevent fire or electric shock hazard.
Cleaning y Before cleaning the Digital Photo Frame make sure it is turned off. y Never spray or pour liquid directly onto the screen or plastic casing. y To clean the LCD screen, wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. If it is still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner on a clean, soft, lint-free cloth to clean the screen. y To clean the plastic casing, use a soft, dry cloth.
Main Features y 21.3cm/8.4”(VFM842) or 26.4cm/10.
Controls and Connections 1. MENU Press to enter main menu 7. Mini-USB connection 2. EXIT Exit button 8. USB HOST 3. ENTER Play/Pause/Confirm button 9. SD/MMC/MS card slot 4. 5. Navigation button Working indicator light 6. ViewSonic Hold to power on or off 5 10. 5V 2A DC Input socket 11. Wall hanger 12.
Remote Control 1 2 To zoom in the photo. EXIT To rotate the photo. 4 To copy or delete files. 5 To move the cursor left. 6 To start slide show. 7 SETUP 8 To enter the setup menu. To turn on/off the unit. 9 To play in mute. 10 To increase the volume. 11 To move the cursor up. 12 To decrease the volume. 13 14 To move the cursor right. ENTER 15 16 ViewSonic To return to the previous menu. 3 To confirm the selection; start or pause playback. To move the cursor down.
Battery installation for the Remote Control y Remove the insulating mylar strip from the battery if the battery is being used for the first time, it is located at the bottom back side of the remote control. y If the remote control unit fails to work even when it is operated near the unit, replace the battery. 1. 2. Press and hold the battery release tab in the direction of arrow n. Pull out the battery holder completely in the direction of arrow o as shown in the left. 3.
Getting Started Hanging the frame to a wall The frame can also be mounted to a wall without the stand. 1. Prepare screws(less than Φ6mm) suitable for the screw holes on the rear panel. 2. Screw the screws into the wall. The distance between screws in horizontal is about 18-24mm. 3. Hang the photo frame on the wall with the wall hanger, you can set the device in the landscape orientation or in the portrait orientation.
Connecting to the power Plug one end of the power adaptor into the DC socket in the Digital Photo Frame, and the other into a wall outlet. Note: To turn on/off the Digital Photo Frame completely, hold the power button.. Inserting Media In order to play photos from a card or a memory stick, insert the card into its respective card slot on the Digital Photo Frame or use the USB port.
1. Insert the SD/MMC/MS card into the 3-in-1 card slot with 2. the metallic contacts facing towards the display. Push a USB memory stick into the USB HOST slot. Note: y Do not use any force while inserting a memory card or attaching a memory stick. y The 3-in-1 card slot only reads one memory card at a time. Do not insert more than one card into one memory card slot. y To remove the cards or the USB memory stick, pull it out gently.
3. 4. 5. USB port on your computer. The computer system detects “New hardware” and starts to install the driver automatically. Wait for the system to finish the installation. When it has finished, several “Removable Disk”, which indicate all drivers of the digital photo frame, will be created in “My computer”. Drag and drop the files on your computer to the memory device connected to the digital photo frame or to the built-in memory.
Appears when you purchase a Frame with NAND flash memory. (only for model with internal Memory memory) SD/MMC/MS Appears when you insert a SD, MMC or MS card. USB Appears when you inserted a USB flash driver. Photo To view photos of the memory source. Music To play music. Video To play videos. Calender To display the Calendar/Clock on the screen. To browse all the files of the memory source and Files copy or delete files. Setup To customize the settings of Digital Photo Frame.
Viewing Photos y Press the EXIT key on the remote as necessary to enter the function select interface. y Use or key on the remote to select a memory source (e.g. USB, SD/MMC/MS) in the main menu and press the ENTER key. y Use or key t on the remote o select Photo icon, and then press the ENTER key on the remote. The photos are displayed on the screen in thumbnails or in slideshow mode which can be adjusted in Setup mode.
Browsing a single photo You can select a single photo to display on the screen: 1. Use or key on the remote to select a photo in the thumbnail view, and press the ENTER key on the remote. Or press ENTER key on the remote repeatedly to chage to single mode during slideshow.The selected photo is displayed on screen. key and press ENTER key on the remote repeatedly. 2. To zoom in a photo, use 3. To rotate a photo, use 4. To return to the thumbnail view, press the EXIT key on the remote. 5.
Listening to Music In Music mode, the music file lists on the selected memory source can be displayed on the screen as thumbnails. 1. Press the EXIT key on the remote as necessary to enter the function select interface. 2. Use or key t on the remote o select a memory source (e.g. USB, SD/MMC/MS) in the main menu and press the ENTER key on the remote. 3. Use key on the remote to select Music icon, and then press the or ENTER key. The music file lists displayed on the screen 4.
Watching Videos In Video mode, the video file lists on the selected memory source can be displayed on the screen as thumbnails. 1. Press the EXIT key on the remote as necessary to enter the function select interface. 2. Use or key on the remote to select a memory source (e.g. USB, SD/MMC/MS) in the main menu and press the ENTER key on the remote. 3. Use key on the remote to select Video icon, and then press the or ENTER key on the remote. The music file lists displayed on the screen 4.
Managing Files In the File mode, you can view all playable files and folders on the memory source. You also can copy or delete the files. 1. Press the EXIT key on the remote as necessary to enter the function select interface. 2. or Use key on the remote to select a memory source (e.g. USB, SD/MMC/MS) in the main menu and press the ENTER key on the remote. 3. Use key on the remote to select Files or icon, and then press the ENTER key on the remote. The file list appears. 4.
Copying photos You can copy photos from memory card or USB to the internal memory. There are two methods: Copy photos from the file manager Use this method, you can only copy one file at a time, and you cannot resize the photo. 1. Press the EXIT key on the remote as necessary to enter the function select interface. 2. Use or key on the remote to select File icon, and then press ENTER on the remote to confirm. 3.
select “Yes”, and then press ENTER. or on the remote to select the directory into which you want to copy the photos, then press ENTER. 7. Use 8. The screen will pop up a window asking you if you want to resize the photo. 9. Use or key on the remote to select the desired option and confirm the choice by selecting “Confirm”, and then press ENTER. Your photos are sized and copied to the internal memory. Deleting photos You can delete photos from internal memory.
key on the remote to select Photo icon and press ENTER to go to the thumbnail mode 3. Use 4. Press COPY/DEL key on the remote to pop up a window “Delete Files? Delete selected, Delete all, Cancel”. Use or or on the remote to select the desired option, and then press ENTER. 5. The thumbnails will be displayed with a small white square in the upper left coner of each. Use or key on the remote to select the photo to be deleted. Then press ENTER to confirm with a tick mark for each photo you select.
3. 4. Press the or key on the remote to skip to previous/next photo. To exit the Clock/Calendar mode, press the EXIT key. Note: y The date, time, date format and clock mode can be adjusted in Setup mode. y You can choose the display mode(Calendar, Clock or Monthly Calendar )in Setup mode. Changing Frame Settings The system settings let you customize and configure your Digital Photo Frame. Press the EXIT key on the remote as necessary to enter the function select interface.
Setting items Items Photo Setup Calendar Setup Video Setup ViewSonic Sub-Items Display Mode Display Ratio Slideshow Duration Slideshow Repeat Slidshow Effect Magic Window Clock Resize Cut out when copy Show tip when copy Display Mode Date Format Date Clock Mode Clock Time Alarm Status Alarm Time Alarm Frequency Display Mode Play Mode Value Description Slideshow, Thumbnail or Single mode Fit to Screen, Crop to fill or Full Screen 5Sec, 15 Sec, 30 Sec, 60 Sec, 5Min, 15Min. Once, Repeat or Random.
Music Setup SystemSetup Auto Play Play Mode Music Effect Show Spectrum Auto Play Language Brightness Contrast Saturation Tint Power on Auto Boot Time Power off Auto Shut Time Auto-Power Frequency Reset Version ViewSonic On or Off Repeat, Random,Once or Repeat One Normal, Rock, Pop, Classic, Soft, Jazz or DBB On or Off On or Off Set up the language of the OSD menu. Adjust the brightness of the screen. The available options include: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16.
Frequently Asked Questions 1. Why cannot the Digital Photo Frame display some files from my Flash card or USB device? • Some unpopular memory cards are not compatible with the device. Use a card which matches with the Digital Photo • The file formats on your card or USB device might not be supported (only JPEG photos are accessible). Provide files Frame. with the supported JPEG. 2. There is a memory card inserted in the Digital Photo Frame, but the device is not able to read the card.
4. Why does the screen not show anything? • The device might not have been turned ON or the adapter is not well connected. 5. Can I rotate a photo on the screen? • YES. Press key on the remote while viewing a single photo. 6. What is the best photo resolution displayed on the screen? • The best resolution is 800*600 and the max photo resolution of this Digital Photo Frame is 8000*8000 pixels.
Specification Display Power Supply Digital LCD Panel size: VFM842: 21.3cm/8.4 inches, VFM1042: 26.4cm/10.4 inches Screen aspect ratio: 4:3 Resolution: 800*600 pixels AC Adapter (Input: 100~240V AC, 50~60Hz; Output: DC 5V 2.0A) USB port USB Host 2.0 Supports USB flash media Supported peripheral devices SD™ (Secure Digital Card), MMC™ (MultiMedia Card), MS™ (Memory Stick).
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/Region Web Site United States www.viewsonic.com Telephone Toll-Free= 1-800-688-6688 Toll: 1-424-233-2530 Fax: 1-909-468-3757 Toll-Free= 1-866-463-4775 Canada www.viewsonic.
Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Mexico Limited Warranty VIEWSONIC Digital Photo Frame What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Distribuciones y Servicios Computacionales SA de CV. Calle Juarez 284 local 2 Col. Bugambilias C.
Guerrero Acapulco GS Computación (Grupo Sesicomp) Progreso #6-A, Colo Centro 39300 Acapulco, Guerrero Tel: 744-48-32627 Monterrey: Global Product Services Mar Caribe # 1987, Esquina con Golfo Pérsico Fracc. Bernardo Reyes, CP 64280 Monterrey N.L. México Tel: 8129-5103 E-Mail: aydeem@gps1.com.mx MERIDA: ELECTROSER Av Reforma No. 403Gx39 y 41 Mérida, Yucatán, México CP97000 Tel: (52) 999-925-1916 E-Mail: rrrb@sureste.com Oaxaca, Oax.: CENTRO DE DISTRIBUCION Y SERVICIO, S.A. de C.V. Murguía # 708 P.A., Col.