User Guide Monitor VG191, VG191b

ViewSonic VG191/VG191b 9
Do the following to adjust the screen image:
1 To display the Main Menu, press button [1].
2
To highlight a control you want to adjust, press
▲
or
▼
to scroll up or down
the Main Menu.
3
To select the highlighted control, press button [2]. A control screen appears
like the one shown below for the selected control.
4
To adjust the selected control, press the up
▲
or down
▼
buttons on the Front
Control Panel of the monitor.
5
To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x
1024 @ 60Hz to the VG191/VG191b. (Look for instructions on “changing
the refresh rate” in your graphic card's user guide.)
• If necessary, make small adjustments using H POSITION and V POSITION
until the screen image is completely visible
. (The black border around the
edge of the screen should barely touch the illuminated “active area” of the
ViewPanel
®
.)
• Adjust FINE TUNE so that the screen image looks focused, crisp, and sharp.
NOTE:
Auto Image Adjust and Manual Image adjust are inactive for digital mode.
NOTE:
All OnView menus and adjustment screens disappear automatically
after about 15 seconds. This time period is adjustable through the Setup menu
and the OSD timeout control described on page 13.