Operating Instructions

NOTE : Before using Camera function, please ensure your Micro SD card is inside.

Tap Camera application.

Please Insert an SD card before using the camera.

Select photograph mode or Video mode

Tap (photograph mode) or (Video mode)

You can see a pre-view window on the Top right corner.

Tap the pre-view icon for editing.

Tap "Back" key to leave this function.

NOTE : If you are not able to use camera, please go the following steps:

(a) Go Settings -> USB camera

(b) Tap

to to Enable USB Camera

(d) Tap Program

(e) Back to item

│TOP│

● 3.6 WiFi

1. Go Settings -> Wireless & networks -> Wi-Fi settings

2. To make “Wi-Fi ” enable. Tap to

3. Once Connected, it will show the AP message.

4. Tap Home button in status bar.

5. Tap Google widget.

6. Tap the text field to activate the keypad.

7. Enter a web address.

8. Tap Go.

│TOP│

● 3.7 3G Connection (optional)

1. Go Settings -> Wireless & networks -> Mobile networks

2. To make “3G” enable. 3G service enabled : Tap to

3. Wait for around 15~20Sec. until there is a symbol for 3G signal

, once you see the SIM card on status bar which means successful 3G connection.

4. Probably, the system will require a password for the SIM card.

5. Tap Home button in status bar.

6. Tap Google widget.

7. Tap the text field to activate the keypad.

8. Enter a web address.

9. Tap Go.

│TOP│

● 3.8 Bluetooth

1. Go Settings -> Wireless & networks -> Bluetooth settings

2. To make “Bluetooth ” enable. Tap to

3. To tap “Scan for devices” then all of “Bluetooth devices”will show up.

4. To tap specific Bluetooth device until the window of pop-up message for connection shows up.

│TOP│