SC-Z55 Zero Client User Guide Model No.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Concentration Actual Concentration Lead (Pb) 0.1% < 0.
Copyright Information Copyright © ViewSonic® Corporation, 2013. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, ViewMeter, and MultiClient are either registered trademarks or trademarks of ViewSonic Corporation. Microsoft®, Windows®, and MultiPoint™ are trademarks of the Microsoft group of companies. ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA).
Product Registration To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. For Your Records Product Name: Model Number: Document Number: Serial Number: Purchase Date: SC-Z55 ViewSonic Zero Client VS15168 SC-Z55_UG_ENG Rev.
About This User’s Manual This installation guide provides basic information on how to set up SC-Z55 zero clients. Manual Structure and Subjects Chapter Subject 1 Provides an overview of ViewSonic SC-Z55 zero clients. 2 Provides detailed instructions on how to set up ViewSonic SC-Z55 zero clients. Specifications Provides detailed information on key components of ViewSonic SC-Z55 zero clients.
Table of Contents Compliance Information i Important Safety Instructions ii Declaration of RoHS Compliance iii Copyright Information iv Product Registration v About This User’s Manual vi Manual Structure and Subjects Notes, Tips, and Warnings 1 2 vi vi Overview 1 1.1 Introduction 2 1.2 Features 1.3 Package Contents 3 1.4 Exterior Views 3 1.5 Panel Components 4 1.6 LED Indicators 6 2 Setting Up Your SC-Z55 7 2.1 Positioning Your SC-Z55 8 2.
1 Overview This chapter provides an overview of your SC-Z55 zero clients. 1.1 Introduction Desktop virtualization and simple endpoint devices 2 1.2 Features Key features of ViewSonic SC-Z55 2 1.3 Package Contents Check your package contents 3 1.4 Exterior Views Overview of zero client outside elements 3 1.5 Panel Components Descriptions of front and rear panel components 4 1.
Overview Introduction 1.1 Introduction Desktop virtualization provides a new perspective to reconsider the design and implementation of an IT infrastructure. In a desktop virtualization infrastructure, a station is no longer a cumbersome desktop, but simply an endpoint device for users to access delivery services from the server(s).
Overview Package Contents 1.3 Package Contents Please check your package contents. Ensure that all of the items are present in your package. If any items are missing or damaged, please contact your dealer immediately. ViewSonic SC-Z55 ViewSonic SC-Z55 AC adapter DVI-I to VGA adapter Stand (VESA plate) Driver CD Quick Start Guide SC-Z55 Zero Client 01/02/13 SC-Z55_CD Compliance Information brochure 1.
Overview Panel Components 1.5 Panel Components ViewSonic SC-Z55 1 2 3 4 5 Front Panel No. Component Sign Name Description 1 Power LED 2 Power button 3 Microphone port Connects to a microphone. 4 Headphone port Connects to a set of headphones or a speaker system. 5 USB port 4 Indicates the status of power. • Press to power on the zero client. • Long press to force power off the zero client. Connects to a USB device.
Overview Panel Components ViewSonic SC-Z55 6 7 8 9 10 Rear Panel No. Panel Component Sign Component Name Description 6 DVI-D port Connects to a high quality digital display device such as a LCD monitor or a digital projector. 7 DVI-I port Connects to a high quality digital display device such as a LCD monitor or a digital projector. 8 LAN port Connects to a network. 9 USB port Connects to a keyboard or mouse. 10 DC IN Connects to an AC adapter.
Overview LED Indicators 1.6 LED Indicators Your SC-Z55 is equipped with a Power LED to indicate the state of power. The meanings of LED signals are described as follows: LED Power LED Signal Meaning Off The client is off. Blue The client is on. The LAN port of your SC-Z55 has two LED indicators showing the state of networking.
2 Setting Up Your SC-Z55 This chapter provides detailed instructions on how to set up your SC-Z55 zero clients. 2.1 Positioning Your SC-Z55 To mount your SC-Z55 Step Step Step Step Step 1: 2: 3: 4: 5: Remove the Stand from Your SC-Z55 Understand Your Stand / VESA Mount Kit for SC-Z55 Store Screws inside the Bracket Remove Screws from the Bracket Mount Your SC-Z55 8 9 10 10 11 2.2 Assembling the AC Adapter How to assemble the AC adapter and its detached plug 11 2.
Setting Up Your SC-Z55 Positioning Your SC-Z55 2.1 Positioning Your SC-Z55 There are two ways to position your SC-Z55: • Put it (with its stand) on a desk or a desired place uprightly. • Mount it on the back of a monitor using a VESA mount kit.
Setting Up Your SC-Z55 Positioning Your SC-Z55 Step 2: Understand Your Stand / VESA Mount Kit for SC-Z55 The stand for your SC-Z55 is dual-purpose: it can be used as a stand or as a VESA mount kit. All screws of different types supplied with the stand / VESA mount kit can be stored away inside the main bracket when not needed. Screws Stored Away inside the Bracket The following figure shows different types of screws stored away inside the main bracket.
Setting Up Your SC-Z55 Positioning Your SC-Z55 Step 3: Store Screws inside the Bracket To store screws inside the bracket, please do the following: NOTE • It’s highly recommended to store screws inside the bracket when not needed to prevent them getting lost. 1. Place a sheet of paper or a piece of cloth on a flat surface, and then put your bracket on that paper or cloth with the screw storage side upward. 2.
Setting Up Your SC-Z55 Assembling the AC Adapter Step 5: Mount Your SC-Z55 To mount your SC-Z55 on the back of a monitor, please do the following: 1. Refer to Step 2 and Step 4 to prepare required screws for mounting your SC-Z55. • You will need two (2) screws of type • You will need two (2) screws of type 2 1 to secure the bracket to your SC-Z55. or 2 to secure the bracket to the monitor. 2. Place your SC-Z55 on a flat surface with the VESA mount hole side upward. 3.
Setting Up Your SC-Z55 Getting Connected 2.3 Getting Connected To make connections for your SC-Z55, please do the following: 1. Connect your SC-Z55 to your local network with an Ethernet cable. 2. Connect a keyboard and mouse to your SC-Z55. 3. Connect and turn on the monitor(s). NOTE • For your SC-Z55, if only the VGA monitor is available, use the supplied DVI-I to VGA adapter to connect your SC-Z55 and monitor.
Specifications ViewSonic SC-Z55 zero client Processor Teradici TERA2321 Memory 512 MB Resolutions Two DVI ports for one display: Up to 2560 x 1600, dual DVI-to-DVI Y cable needed (optional) One DVI port for one display: Up to 1920 x 1200 I/O interfaces Front: 2 x USB 2.0 Networking 1 x 10/100/1000Mb Ethernet Power DC Power In: DC 5V, 3A External Power Adapter: AC 100-240, 50/60Hz, 0.5A 1 x Microphone 1 x Headphone Rear: 2 x USB 2.
Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 Europe www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty ViewSonic® Thin Client What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages. 2.
