ViewSonic ® VNB108 ViewBook - User Guide - Guía del usuario - Guia do usuário - 사용자 안내서 - 使用手冊(繁中) - 使用手冊 (簡中) Model No.
Important Safety Instructions 1. DO NOT press or touch the LCD Screen. DO NOT place notebook PC with small items, they may scratch LCD Screen or penetrate the vents of notebook PC. 2. DO NOT expose notebook PC to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place notebook PC on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of notebook PC. DO NOT shove any foreign objects into notebook PC. DO NOT close with force the LCD Screen lid. 5.
15. DO NOT insert anything into notebook PC that may result in short circuit or can damage the electronic circuits. 16. Power off your notebook PC, if you want to install or remove some external devices, which do not support hot-plugging-in. 1 . Disconnect your notebook PC from the electrical outlet and remove any installed batteries before cleaning the notebook PC. Keep your notebook PC away from children. 18. DO NOT disassemble notebook PC.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation.
Table of Contents Chapter 1 Introduction...................................................................................................1 1.1 Package Checklist.................................................................................................1 1.2 Specifications.......................................................................................................2 1.3 Knowing the Parts................................................................................................3 Top view.
Chapter 1 Introduction 1.1 Package Checklist Thank you for choosing ViewSonic ViewBook. Please check if the packaging or any of the below listed accessories are damaged or missing, in which case please contact with ViewSonic local representative office. • • • • • • ViewBook netbook computer Lithium-lon Battery Power Cord Power Adapter Quick Start Guide Driver disc * The items listed above are for reference only, and are subject to change without notice.
1.2 Specifications CPU Chipset LCD Screen Power Management System Memory Mass Storage User Interface Audio Digital Camera Ethernet LAN Wireless LAN Security Port Battery Dimension Weight ViewSonic - Intel® Atom Processor Intel® Tigerpoint (NM10) 25cm/10.1” WSVGA color TFT-LCD with LED Backlight Resolution: 1024*600 pixels ACPI V3.0 S0，S3，S4，S5 support DDR2 667MHz (Single Channel) 2×DDR2 SO-DIMM slots Supports SATA HDD Easy upgradable 6.35cm/2.5’' 9.
1.3 Knowing the Parts After having checked the package and installed your ViewBook, let’s get familiar with its parts.
NO. Item Description 1 Built-in camera 2 3 Microphone Display screen The built-in 0.3 megapixel camera allows you to snap a photo or create a video chat or video conference with just a click. Internal microphone for sound recording. Also called Liquid-Crystal Display (LCD), displays computer output. 4 5 6 7 8 Power button Keyboard Palm rest Touchpad Click buttons (left and right) Status indicators 9 This button turns your ViewBook on and off or puts it to sleep.
NO. Item Description 4 Battery Pack 5 Rating Label 6 Fan Outlets The battery pack is automatically charged when your ViewBook is connected to an AC power source. It maintains power to your ViewBook when AC power is not connected. This allows for use of ViewBook when AC power outlet is not available. Battery time varies with the way you use your ViewBook. The battery pack cannot be disassembled and must be purchased as a single unit.
1.4 ViewBook usage Battery usage ViewBook has two sources of power supply – the battery and the power adapter. Before turning on your ViewBook, please install the battery or connect the power adapter. Installing the battery 1. Turn ViewBook up side down and place it on a flat surface; 2. Gently push the manual battery lock into the unlocked position; 3. Slide the battery into its slot. When doing so make sure the battery goes exactly along its slides.
Connecting to the AC power supply 1. Connect the power cord to the power adapter; 2. Connect the power cord to the AC power outlet; 3. Push the DC power connector of the power adapter into the power jack in your ViewBook. 3 1 2 ViewBook is supplied with DC power of +19V @ 40W and the power adapter can accept AC 110~240V, 50~60HZ, maximum 1.5A, outputting +19V, 2.1A.
Startup 1. Open the lid of your ViewBook. Please don’t force the lid to open beyond its extreme position, or it may damage the lid hinge. Please don’t carry the open ViewBook by holding it by its lid. 2. Press power button to start. Shutdown 1. When using Microsoft Windows, click on “Shutdown” item in the “Start” menu to shut down the operating system. 2. You can also short-press the Power button to shut down your ViewBook, if this function is enabled in your Operating System (OS) settings. 3.
Indicators ViewBook has several easy-to-read status indicators. Icon Function Description HDD A blinking HDD LED suggests an HDD activity (data is being read or written). Battery Adapter You can judge about the battery status from the battery LED indicator: a blinking orange light means the battery is being charged; a continuous green light means the battery has been fully charged. When the system is turned on, the power LED has a continuous light, and is blinking when ViewBook is in Sleep mode.
Touchpad The built-in touchpad is a pointing device that senses movement on its surface. This cursor responds as you move your finger across the surface of the touchpad. Touchpad basics The following items show you how to use the touchpad: 1 Left button 2 Main touchpad 3 Right button • Move your finger across the touchpad (2) to move the cursor. • Press the left (1) and right (3) buttons located beneath the touchpad to perform selection and execution functions.
Using the keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursors, lock keys, Windows key, Application key, function and special keys. Lock keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Description Caps Lock Num Lock + When Caps Lock is on, all alphabetic characters typed appear in uppercase. When Num Lock is on, the embedded numeric keypad is activated.
Windows keys The keyboard has two keys that perform Windows-specific functions. Key Windows key Description Pressed alone, this key has the same effect as clicking on the Windows Start button, it launches the Start menu.
Chapter 2 BIOS Setup Utility 2.1 When to Use BIOS Setup? You may need to run the BIOS Setup when: An error message appears on the screen during the system boot and you are requested to run SETUP. You want to change the default settings for customized features. You want to reload the default BIOS settings. 2.2 How to Run BIOS Setup? To run the BIOS Setup Utility, turn on your ViewBook and press the key during the POST procedure.
2.4 Boot Device Priority After you press the Power button of your ViewBook to turn it on, you can choose the boot options by pressing F11. Notes: The menu will be different depending on the storage devices installed or connected. Please select boot device: SATA: HTS3543216L9A300 SATA:PM-Hitachi PM-Hitachi HTS3543216L9A300 USB: Generic-Multi-Card ↑ and↓ to move selection ENTER to select boot device ESC to boot using defaults 2.
2.5.2 Advanced setting Main Aptio Setup Utility-Copyright (C) 2009 American Megatrends,Inc Advanced Boot Security Save & Exit Cpu Information Processor Type Intel(R) Atom(TM) CPU N450 @ 1.66GHZ Process Speed 1667 MHZ System Bus Speed 667MHZ L1 Cache RAM 56K L2 Cache RAM 512K Enable or Disable Boot Option for Legacy NetWork Devices. Memory Information Menory Frequency 667 Mhz Total Memory 2048 MB DIMM#0 1024 MB DIMM#1 1024 MB Hdd Information SATA Port0 SATA Port1 WDC WD1600BEVT (160.
• Full Screen Logo This allows you to enable or disable the full screen logo display feature. • Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. • Bootup Numlock State You can select the keyboard Numlock state. • Boot Option #1 You can set the system boot order. • Hard Drive BBS Prioroties You can set the order of the legacy devices in this group. 2.5.
2.5.5 Save & Exit Setting Main Aptio Setup Utility-Copyright (C) 2009 American Megatrends,Inc Advanced Boot Security Save & Exit Save Changes and Exit Discard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options Save Changes Discard Changes Exit system setup after saving the changes. :Select Screen →←:Select Item Restore Defaults ↑ ↓ +-:Change Opt F1:General Help F2:Previous Values F3:Optimized Defaults F4:Save ESC:Exit Version 2.00.1201.
Chapter 3 System Recovery How to restore the previously backed up system in Windows If your system has not been damaged completely, you can use Windows mode to restore the system to the previously backed up state. 1. Click on the “Security Center” icon on your Desktop and choose “System Backup and Restoration”. 2. Choose “System Restoration” option in the Security Center control panel.
3. Click “System Restoration” button, you will see the restore points. Please choose any of restore points which you want your system to restore to; then click the “Next” button. 4. As the restore point was created for the C: disk partition, there is a need to reboot to complete the restore process. Click the “Next” button and the OS will auto reboot.
5. ViewBook will auto restore the system after reboot, Windows will need few minutes to complete this task. After the system restore is complete, Windows will display the following window. Please click the “Restart” button to finish.
Restore the backed up system under DOS mode 1. Press the F9 key during boot to enter the Security Center. 2. Press the F9 key to enter into security center interface if you want to restore your system. 3. After pressing the F9 key, you will see the System Restoration and Rescue Data options.
4. Click “System Restoration” and then click “Start Rescue” button. 5. Choose one of restore points to restore your OS and click “Start Rescue” button. All files on drive C: and settings will be deleted. System recovery will format the hard disk and restore the system to its default state.
6. An alert will pop up after clicking the “Start Rescue” button, please click “Ok”. 7. After the restore process is complete you will see an information window. Click on the “Restart” button to finish.
Rescue the data under DOS mode 1. Click “Rescue Data” option in the security center to start the rescue. 2. Choose the files or folders to rescue and then click “Rescue Data”.
3. Choose the HDD partition where you would like to save the restore point to. 4. After clicking OK, the files will be backed up.
5. Please restart your ViewBook after the backup has successfully finished. 6. After the backup has finished and the system was restarted, you can copy the backup file to one of your external storage devices.
Troubleshooting 1. Where are the webcam captures stored by default? By default webcam captures are saved to C:\Documents and Settings\All Users\ Application Data\Microsoft\WIA\{6BDD1FC6-810F-11D0-BEC7-08002BE1092F}\0001 folder. 2. How to use the embedded numeric keypad? Press + to turn the Numeric Lock on, now you can use the Embedded Numeric Keypad. 3.
8. A Hard Disk Drive Problem: HDD doesn’t work. Enter the BIOS Setup utility, go to Boot menu and make sure the hard disk drive is included in the Boot Sequence. 9. ViewBook does not respond. In case the system is not responding, to turn off your ViewBook, press and hold the power button for about 6 seconds. If your ViewBook still does not respond, remove the AC adapter and the battery. Your ViewBook might have locked when it was entering Sleep mode while performing a communication operation.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Region Australia/New Zealand Canada Europe Hong Kong India Ireland (Eire) T = Telephone Email F = FAX AUS= 1800 880 818 www.viewsonic.com.au service@au.viewsonic.com NZ= 0800 008 822 T (Toll-Free)= 1-866-463-4775 www.viewsonic.com T (Toll)= 1-424-233-2533 service.ca@viewsonic.com F= 1-909-468-3757 www.viewsoniceurope.com www.viewsoniceurope.
Limited Warranty VIEWSONIC® NETBOOK What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
