ViewSonic ® VOT120 PC Mini - User Guide - Guide de l’utilisateur - Bedienungsanleitung - Podręcznik użytkownika - Pyководство пользователя - Uživatelská píruka - 使用手冊(繁中) Model No.
Preface Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC Radiation Exposure Statement This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This wireless module device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Industry Canada Notice This wireless module device complies with Canadian RSS-210.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury (
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation. Award® is a registered trademark of Phoenix Technologies Ltd.
Content Chapter 1 Introduction .......................................................................................... 1 Overview............................................................................................... 1 Product Specifications .......................................................................... 2 System Tour ......................................................................................... 3 Chapter 2 Getting Started .......................................
Figures Figure 1 Front Panel................................................................................................... 3 Figure 2 Rear Panel ................................................................................................... 5 Figure 3 Connecting the DVI cable ............................................................................ 7 Figure 4 Connecting USB mouse & keyboard............................................................ 8 Figure 5 Network cable with RJ45 connector .
Chapter 1 Introduction Overview The VOT120 is a PC mini in a small format that is ideal for space critical installations. This system is designed with the Intel® Atom N270 processor which allows for computing power in small devices. This PC can be used on the desktop or mounted on the back of your LCD. NOTE The contents of your package may be different due to regional variations.
Product Specifications Dimensions 39 x 130 x 115 mm (WxHxD), 1.5 x 5.1 x 4.5 inch (WxHxD) Weight 550 g / 1.21 lb CPU/ Chipset Intel® Atom N270 Processor , 945GSE / ICH7-M RAM 1 x DDR2 SO-DIMM up to 2GB Storage 1 x 2.5” SATA HDD , or 1x SSD Front IO 1x Line-Out, 1x MIC-In 1x Push button for power on/off 1x Push button for reset 1x POWER LED 1x HDD LED 1x WiFi LED 2x USB2.0 1x eSATA connector Rear IO 1x DC JACK 1x DVI-I connector for CRT & DVI output 2x USB2.
System Tour Refer to the diagram below to identify the components of the system. Front Panel Figure 1 Front Panel USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. WiFi LED When the data is transferring, the WiFi LED will blink.
eSATA The eSATA connector provides an external connectivity for mass storage devices. CAUTION This connector does not support hot-swapping. Users should not connect or disconnect their eSATA devices from PC when the system is working. MIC-IN The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple audio recordings. Headphone Jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones.
Rear Panel Figure 2 Rear Panel USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. DVI Port The Digital Visual Interface (DVI-I) port supports a high quality VGA-compatible device such as a monitor or LCD TV to allow viewing on a larger external display.
Ethernet The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. DC 19V The supplied power adapter converts AC power to DC 19V power for use with this jack. Power supplied through this jack supplies power to the PC. To prevent damage to the PC, always use the supplied power adapter. Kensington Lock Slot The slot is used for attaching a lock-and-cable apparatus.
Chapter 2 Getting Started Setting up your PC Connecting the monitor Connect the DVI cable from your display to the DVI port. Figure 3 Connecting the DVI cable NOTE To connect a VGA display, you need a DVI to VGA adapter to connect a display with a VGA connector. NOTE When the system reboots without connecting the DVI connector, there may not be any image on the screen when you insert the DVI cable. Please press ++ simultaneously to show the image on screen.
Connecting USB mouse & keyboard Your VOT120 does not come with a keyboard and mouse, but you can use any USB keyboard or mouse with your computer. Figure 4 Connecting USB mouse & keyboard NOTE Using a third-party USB mouse or keyboard may require software drivers. Check the manufacturer’s website for the latest software drivers. Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch.
Turning on the system 1. 2. 3. 4. Connect the power adapter cable to the DC jack (DC IN) of the VOT120 Connect the power cable to the power adapter Connect the power cable to a power outlet Press the power switch on the front panel to turn on the system Figure 6 Turning on the system Anti-theft protection with a Kensington Lock The VOT120 has a Kensington lock slot for the Kensington MicroSaver.
Computer Stand You can use the computer stand to keep the VOT120 stable on your desktop. Please do not block the ventilation holes and be sure to leave sufficient space around the unit for ventilation. Figure 8 Computer Stand Mounting your PC to a monitor 1. Secure the VESA mounting kit to your monitor with four screws. Figure 9 VESA mounting (1) NOTE To fasten the metal shelf, your monitor must comply with VESA75 or VESA100 standard.
2. 3. Place the VOT120 on the VESA mounting bracket. Make sure the air vents are hooked by the VESA mounting bracket and VOT120 is solidly secured to the display. Figure 10 VESA mounting (2) NOTE Tthe total weight of the unit won’t exceed 7 kg.
Chapter 3 AMI BIOS Setup Overview This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact ViewSonic®. NOTE: The BIOS menus and selections for your product may vary from those in this chapter.
Main Menu The BIOS Setup is accessed by pressing the F2 button after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
LBA/ Large Mode [Auto] Enables or disables the LBA (Logical Block Addressing)/ Large mode. Setting to Auto enables the LBA mode if the device supports this mode, and if the device was not previously formatted with LBA mode disabled. Options: Disabled, Auto DMA Mode [Auto] Options: Auto S.M.A.R.T [Auto] SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows AMIBIOS to use the SMART protocol to report server system information over a network.
Advanced Menu Table 5 Advanced Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Advanced Settings Warning: Setting wrong values in below sections may cause system to malfunction. > OnBoard Peripherals Configuration <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc. > Hardware Health Configuration Press to select a sub-menu for detailed options.
USB Device Legacy Support [Enabled] Options: Enabled, Disabled, Auto Audio Controller [Enabled] Options: Enabled, Disabled Onboard LAN Controller [Enabled] Options: Enabled, Disabled Onboard LAN OPTROM [Disabled] Options: Enabled, Disabled WLAN Controller [Enabled] Options: Enabled, Disabled Table 7 Hardware Health Configuration BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Disabled Hardware Health Configuration CPU Shutdown Temperature [Disabled] 80°C/176°F CPU Temperature :4
Boot Menu Table 8 Boot Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Specifies the Boot Device Priority sequence. Boot Settings > Boot Device Priority > Hard Disk Drives <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Hit ‘F2’ Message Display [Enabled] When set to Enabled, the system displays the message ‘Press F2 to run Setup’ during POST.
Power Menu Table 10 Power Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Management Setting ACPI Function [Enabled] Suspend mode [S3 (STR)] Repost Video on S3 Resume [No] Suspend Time Out [Disabled] Restore on AC Power Loss [Power Off] Resume By USB Device [Disabled] Resume By PCI-E Device [Disabled] Resume On RTC Alarm [Disabled] Power Security Exit Select the ACPI state used for System Suspend <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General
Resume By PCI-E Device [Disabled] Options: Disabled, Enabled Resume On RTC Alarm [Disabled] Options: Disabled, Enabled Security Menu Table 11 Security Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Install or Change the password. Security Setting Supervisor Password :Not Installed User Password :Not Installed <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Exit Menu Table 12 Exit Menu BIOS SETUP UTILITY Main Advanced Save Changes and Exit Discard Changes and Exit Discard Changes Load Failsafe Defaults Chipset Power Security Exit Exit System Setup after saving the changes. Exit Setting Load Optimal Defaults Boot F10 key can be used for this operation. <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Load Optimal Defaults Load Optimal Default values for all the setup values. This option allows you to load optimal default values for each of the parameters on the Setup menus, which will provide the best performance settings for your system. The F9 key can be used for this operation. Load Failsafe Defaults Load Optimal Default values for all the setup values.
Chapter 4 System Recovery When to Use System Recovery You need to run system recovery: In the event of a system or hardware failure. You need to restore the system back to its default settings. You forgot the system password. System recovery will format the hard disk and restore the system to its default settings. However all files and other data on drive C: will be deleted. Running ViewSonic® Recovery Manager Your PC Mini uses ViewSonic® Recovery Manager for system recovery functions.
3. The following window appears. Click OK. This action will get your system back to default settings. All files and settings on C drive will be lost. Are you sure to continue ? OK 4. Cancel Another confirmation message appears as below. Click OK. This action will format your hard disk and all data on Cdrive will be lost. Please be sure to continue again. OK 5. Cancel System recovery is initiated and the following screen appears.
Chapter 5 FAQ & Troubleshooting Frequently asked questions Q1: How to change Boot device from HDD to other bootable devices? A1: When seeing POST message, press “F11” to load BBS table then to select the bootable device you plugged in. Q2: How to use the e-SATA device in VOT120? A2: the e-SATA connector for the VOT120 does not support a hot plug device, you have to plug it in before you boot the system. Please note if you’re using 3.5” HDD, please provide extra power input for the HDD.
Troubleshooting 1. System would not power on or power off by pressing power button. 1.1. Check all power connections. 1.2. Make sure the DC plug is inserted correctly. If the power LED does not light you may have a faulty power adapter. 1.3. If the power button does not function you may have a faulty button. 1.4. If you can press the power button in but the power LED does not light, you may have a faulty power button 1.5.
Chapter 6 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone F = FAX Country/Region Website Australia/New Zealand www.viewsonic.com.au Canada www.viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm Hong Kong www.hk.viewsonic.com T= 852 3102 2900 service@hk.viewsonic.com India www.in.viewsonic.
Limited Warranty VIEWSONIC® PC MINI What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
