ViewSonic ® VOT125 PC Mini - User Guide - Guide de l’utilisateur - Guía del usuario Model No.
Preface Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Industry Canada Notice This wireless module device complies with Canadian RSS-210.To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmitting antenna) that is installed outdoors is subject to licensing.
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Do not block any ventilation openings. Install the equipment in accordance with the manufacturer’s instructions. 7.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Substance Proposed Maximum Concentration Actual Concentration Lead (Pb) 0,1% < 0,1% Mercury (
Copyright Information Copyright © ViewSonic® Corporation, 2010. All rights reserved. Microsoft®, Windows®, Windows NT®, and the Windows® logo are registered trademarks of Microsoft® Corporation in the United States and other countries. ViewSonic®, the three birds logo, OnView®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Intel®, Pentium®, and Atom™ are registered trademarks of Intel Corporation. AMI® is a registered trademark of American Megatrends Inc.
Content Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Introduction ............................................................................................. 1 Overview............................................................................................... 1 Product Specifications .......................................................................... 2 System tour.........................................................................................
Figures & Tables Figure 1 Front Panel .................................................................................... 3 Figure 2 Rear Panel..................................................................................... 5 Figure 3 Connect the HDMI cable................................................................ 7 Figure 4 Connect the DVI cable ................................................................... 8 Figure 5 Connecting USB mouse & keyboard.........................................
Chapter 1 Introduction Overview The VOT125 is a surprisingly affordable, space-saving PC mini that will capably serve your everyday computing needs with ease. Featuring the Intel® GMA graphics solution coupled with the Intel® Processor, it perfectly balances extreme value with functionality. In addition to handling standard computing needs it can also stream movies, TV shows, music and other online media.
Product Specifications Construction Plastic Housing Proprietary motherboard, Intel® Celeron Processor SU2300 , (Optional : System Board 743, SU4100, SU7300) GS40 / ICH9M (GS45 for SU7300) Memory DDR2 667/800 SO-DIMM up to 2GB Front I/O panel 1x Phone Jack for Line-Out 1x Phone Jack for MIC-In 1x Push button for power on/off 1x POWER LED 1x HDD LED 1x Wifi LED 1x Card Reader LED 3x USB2.
System tour Refer to the diagrams below to identify the components of the system. Front Panel Figure 1 Front Panel USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs.
Headphone Jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones. Memory Card Reader The built-in memory card reader supports MMC/MS/SD cards used in devices such as digital cameras, MP3 players, mobile phones, and PDAs. Power LED The power LED will light when the PC is powered-on. HDD LED The hard disk LED blinks when data is being written onto or read from the HDD. WiFi LED When the data is transferring, the WiFi LED will blink.
Rear Panel Figure 2 Rear Panel HDMI HDMI (High-Definition Multimedia Interface) is a compact audio/video interface for transmitting uncompressed digital data. RTC Reset (CMOS Reset) To clear the CMOS, use the tip of a pen to press the Reset button briefly (for less than three seconds). DVI Port The Digital Visual Interface (DVI-I) port supports a high quality VGA-compatible device such as a monitor or LCD TV to allow viewing on a larger external display.
USB The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mouse devices, cameras, and external storage devices. The USB ports allow multiple devices to run simultaneously on a single computer, with some peripherals acting as a hub. Ethernet The eight-pin RJ-45 LAN port supports a standard Ethernet cable for connection to a local network. DC Jack The supplied power adapter converts AC power to DC for use with this jack.
Chapter 2 Getting Started Setting up your PC Connecting the monitor Connect the HDMI cable from your display to the HDMI port.
Connect the DVI cable from your display to the DVI port. Figure 4 Connect the DVI cable NOTE To connect a VGA display, you need the DVI to VGA adapter to connect a display with a VGA connector. Connecting USB mouse & keyboard Your VOT125 does not come with a keyboard and mouse, but you can use any USB keyboard or mouse with your computer.
NOTE Using a third-party USB mouse or keyboard may require software drivers. Check the manufacturer’s website for the latest software drivers. Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a hub or switch. Figure 6 Network cable with RJ45 connector Turning on the system 1. 2. 3. 4.
Mounting your PC to a monitor 1. Secure the VESA mounting kit to your monitor with four screws. Figure 8 VESA mounting (1) NOTE To fasten the mounting bracket your monitor must have VESA75 or VESA100 standard holes. The VESA mounting kit is optional.. 2. 3. Place the VOT125 on the VESA mounting bracket. Make sure the air vents are hooked by the VESA mounting bracket and VOT125 is solidly secured to the display.
VESA Mounting Kit Dimension (Unit: mm) Anti-theft protection with a Kensington Lock The VOT125 has a Kensington lock slot for use with the the Kensington MicroSaver anti-theft device. With the MicroSaver, which has a sturdy steel cable, you can attach your VOT125 to a stationary object and protect your PC from theft.
Computer Stand Use the stand to position the computer to your preference and for stability to the computer. Please do not block the ventilation holes and be sure to leave sufficient space around the unit for ventilation.
Chapter 3 AMI BIOS Setup Overview This chapter provides a description of the AMI BIOS. The BIOS setup menus and available selections may vary from those of your product. For specific information on the BIOS for your product, please contact ViewSonic. NOTE: The BIOS menus and selections for your product may vary from those in this chapter.
Main Menu The BIOS Setup is accessed by pressing the DEL key after the Power-On Self-Test (POST) memory test begins and before the operating system boot begins. Once you enter the BIOS Setup Utility, the Main Menu will appear on the screen. The Main Menu provides System Overview information and allows you to set the System Time and Date. Use the “<” and “>” cursor keys to navigate between menu screens.
DMA Mode [Auto] Options: Auto S.M.A.R.T [Auto] SMART stands for Smart Monitoring, Analysis, and Reporting Technology. It allows AMIBIOS to use the SMART protocol to report server system information over a network. Options: Auto, Disabled, Enabled Table 4 System Information BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit AMIBIOS Version : 0.
Table 6 CPU Configuration BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit CPU Feature Execute-Disable Bit Capability [Enabled] <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc. Max CUPID Value Limit [Disabled] Execute-Disabled Bit Capability [Enabled] When disabled, force the XD feature flag to always return 0.
Onboard LAN OPTROM [Disabled] Options: Enabled, Disabled Onboard Mini PCIE Controller [Enabled] Options: Enabled, Disabled HDA Controller [Enabled] Options: Enabled, Disabled > On-Chip ATA Configuration SATA Mode SelectConfiguration [Enabled] Options: Enabled, Disabled Configure SATA as [IDE] Options: IDE, AHCI Table 8 Hardware Health Configuration BIOS SETUP UTILITY Main Advanced Boot Chipset Power Hardware Health Display CPU Shutdown Temperature :[Disabled] FAN1 Mode Setting : [Smart Fan Mode] C
Boot Menu Table 9 Boot Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Specifies the Boot Device Priority sequence. Boot Settings > Boot Device Priority Quick Boot Full Screen LOGO Display Bootup Num-Lock Wait For ’F1’ If Error Hit ’F2’Message Display [Enabled] [Enabled] [ON] [Enabled] [Enabled] <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Chipset Menu Table 10 Chipset Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Chipset Settings Internal Graphics Mode Select [Enabled, 32MB] DVMT Mode Select [DVMT Mode] <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Power Menu Table 11 Power Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Management Setting ACPI Function [Enabled] Suspend mode [S3 (STR)] Repost Video on S3 Resume [No] Restore on AC Power Loss [Power Off] Resume From S3 By USB Device Resume By PCI-E Device Resume On RTC Alarm [Disabled] [Disabled] Power Security Exit Select the ACPI state used for System Suspend <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit [Dis
Security Menu Table 12 Security Menu BIOS SETUP UTILITY Main Advanced Boot Chipset Power Security Exit Install or Change the password. Security Setting Supervisor Password :Not Installed User Password :Not Installed <> Select Screen ↑↓ Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit V02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Save Changes and Exit Exit system setup after saving the changes. Once you are finished making your selections, choose this option from the Exit menu to ensure the values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an onboard backup battery and stays on even when the PC is turned off. When you select this option, a confirmation window appears. Select [Yes] to save changes and exit. Discard Changes and Exit Exit system setup without saving any changes.
Chapter 4 System Recovery When to Use System Recovery You need to run system recovery: In the event of a system or hardware failure. You need to restore the system back to its default settings. You forgot the system password. System recovery will format the hard disk and restore the system to its default settings. However all files and other data on drive C: will be deleted. Running Recovery Manager To run system recovery, follow the steps below: 1. Turn on the PC Mini.
2.2 Recovery from HDD Quickly press the F3 button on the keyboard. The window below appears. Click OK to Start Recovery. NOTE If Windows operating system starts up before you press F3 and you still wish to run System Recovery, restart the PC Mini then follow the same procedures above. 3. Another confirmation message appears as below. Click OK. 4. System recovery is initiated and the following screen appears.
5. After the system has been restored, the system will restart. NOTE Restarting may take several seconds to finish. 6. After restarting, Windows Setup Wizard appears to help you configure basic settings. Follow the on screen instructions to complete setup and start using your PC Mini.
Chapter 5 FAQ & Troubleshooting Frequently asked questions Q1: How to boot-up the system from HDD to other bootable devices? A1: When seeing POST message, press “F11” to load BBS table then to select the bootable device you plugged in. Q2: How to use the e-SATA device in VOT125? A2: the e-SATA connector for the VOT125 does not support a hot plug device, you have to plug it in before you boot the system. Please note if you’re using 3.5” HDD, please provide extra power input for the HDD.
Troubleshooting 1. System would not power on or power off by pressing power button. 1.1. Check all power connections. 1.2. Make sure the DC plug is inserted correctly. If the power LED does not light you may have a faulty power adapter. 1.3. If the power button does not function you may have a faulty button. 1.4. If you can press the power button in but the power LED does not light, you may have a faulty power button 1.5.
Chapter 6 Other Information Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone F = FAX Country/Region Website Australia/New Zealand www.viewsonic.com.au Canada www.viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/Support/Calldesk.htm Hong Kong www.hk.viewsonic.com T= 852 3102 2900 service@hk.viewsonic.com India www.in.viewsonic.
Limited Warranty VIEWSONIC® PC MINI What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a similar product. Replacement Product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
