VP3D1 3D Video Processor User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9.
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/ EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum ConSubstance Actual Concentration centration Lead (Pb) 0,1% < 0,1% Mercury (H
Copyright Information Copyright © ViewSonic® Corporation, 2011. All rights reserved. ViewSonic®, the three birds logo, On View®, ViewMatch™, and ViewMeter® are registered trademarks of ViewSonic® Corporation. Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
CONTENTS Introduction ........................................................................ 2 Features ......................................................................................................................2 Package Contents ....................................................................................................... 2 Product Overview ............................................................... 3 Front View ....................................................................
Introduction Features Convert 3D video from several popular formats for display on DLP-Link 3D ready projectors. Automatically identify 3D input signal from 3D Blu-rayTM Disc Player and convert it to 720p 120Hz. Compatible with HDMI 1.4a 3D formats including side-by-side, etc. Pass 2D images unaltered for normal display Manually convert side-by-side 3D signal by pressing SBS Mode button.
Product Overview Front View 1 1 2 SBS (Side-By-Side) Mode button HDMI 2 button 2 3 4 3 HDMI 1 button 4 POWER button Rear View 5 6 8 7 5 DC power input 7 HDMI in 1 / HDMI in 2 6 Service 8 HDMI out (to projector) 3
LED Indicators Power LED is red. SBS MODE LED is blue when this feature is selected. HDMI 1LED is blue when this input source is selected and detected. HDMI 2 LED is blue when this input source is selected and detected.
Connecting Video source devices menu Sky+HD, Cable / Satellite box VP3D1 3D Video Processor 3D Capable DLP Projector PlayStation 3 3D Blu-ray™ Player 3D Glasses 5
Using the 3D Video Processor Once you have connected your devices together with HDMI cables, as shown in the diagram, you are ready to begin. Power ON your 3D video source, 3D Video Processor and your 3D projector.(*) Note *: The 3D video source device must be powered on before the 3D Video Processor. PlayStation® 3 Games 1. 2. Make sure that you have updated your console to the latest software version in PlayStation® 3. Go to the "Settings menu → Display settings → Video output → HDMI".
Operation 1. 2. 3. 4. Connect your VP3D1 3D Video Processor to a 3D Blu-rayTM Player using a HDMI cable. Connect your VP3D1 3D Video Processor to a 3D Ready DLP® projector using another HDMI cable. Turn on your sources (3D Blu-rayTM Player, VP3D1 3D Video Processor and 3D Ready DLP® projector). Press the “PLAY” button on the player. 3D Blu-ray™ Player 5. 6. Make sure the power of the 3D glasses is on.
Specifications Native 3D output resolution Maximum output resolution Inputs HD Ready 720p120Hz Full HD 1080P 2x HDMI 1.4a (HDCP) - audio supported USB type A for firmware update Outputs 1x HDMI 1.3 (HDCP) - audio supported 2D video compatibility PAL SECAM 576i/p, NTSC 480i/p, HD 720p/1080i/1080p Power supply (AC adapter) AC 100-240 V, 50 - 60 Hz, 3.0A Power consumption 10W (<1W standby) Dimension (W x D x H) 430 x 210 x 36 mm Weight 1.3kg ( 2.
Troubleshooting No image appears on screen. 1. Ensure all the cables and power connections are correctly and securely connected as described in the "Connection" section. Ensure all the pins of connectors are not bent or broken. Make sure you have powered on all the devices. Blurry double image. 2. 3. 1. 2. 3. 1. Press "SBS Mode" button to "Off" to avoid normal 2D image is blurry double image. Two images, side-by-side format. Press "SBS Mode" button to "On" for input signal is HDMI 1.
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.au AUS= 1800 880 818 NZ= 0800 008 822 service@au.viewsonic.com Canada www.viewsonic.com T (Toll-Free)= 1-866-463-4775 T (Toll)= 1-424-233-2533 F= 1-909-468-3757 service.ca@viewsonic.com Europe www.viewsoniceurope.com www.viewsoniceurope.com/uk/support/call-desk/ Hong Kong www.
Limited Warranty VIEWSONIC® 3D Video Processor What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1.
